Check the listing for details. 25 lbs 1/2" X 15" Hot Melt Glue Sticks. Good for General Packaging, Woodworking. Condition: New. Listed at 130.44 USD. This general-packaging hot melt glue stick is excellent for sealing corrugated cartons. It is compatible with cardboard, wood materials, chipboard, and paper applications. ASA-8161 delivers fast setting bonds to most corrugated packaging materials and is an excellent replacement for carton sealing tapes and staples. Delivering high output and low viscosity, ASA-8161 sets rapidly under compression so operators can create a superior carton closing bond with minimal effort. Works on high and low temperature glue guns. Fast set, ASA-8161 should be dispensed with standard temperature hot melt guns at a heat of around 350 degrees F. FDA Status: Meets composition requirements for FDA reg 21 CFR 175.105 for food packaging adhesives Recommended Applications: General packaging Repacking chipboard Paper to paper bonding, requiring fast set Great for Bonding: Corrugated box Furniture Chipboard Performance: Softening Points: 216°F (102°C) Heat Resistance: 158°F (70°C) Open Time: 10 seconds Setting Time: 5 seconds Appearance: Light yellow stick Setting Time: 5 seconds Viscosity: 4000 cps @ 338oF Size: 1/2” diameter x 15” length Handling: Material is applied hot; appropriate clothing and eye protection should be used. Use adequate ventilation to remove any hot melt fumes or vapors that are generated. Keep containers and premelters covered to avoid contamination. Store in dry cool conditions. Packaging: 25 lbs carton (approximately 375 sticks)