Check the listing for details. 2Ton snatch block w/hook flatbed tow truck rollback wrecker carrier recovery. Condition: New. Listed at 36.00 USD. DescriptionPlate sided, painted, heavy duty snatch block with hook, 3" diameter sheave grooved for 3/8" wire rope. Sheave is equipped with bronze bushing and grease fitting (grease zerk). Working Load Limit: 2 tons. Weight: 5 lbs. Ultimate block strength is 4 times the working load limit.Quantity 13" Sheave Diameter Wire Rope Size 3/8"Bronze Bushed with Grease FittingWorking Load Limit 2 TonsUsed for wreckers, tow trucks, four wheel drives and riggingPlease Bear in Mind That Photo May Slightly Different From Actual Item in Terms of Color Due to the Lighting During Photo Shooting or the Monitor's Display ** COLOR SHIPPED WILL VARY DEPENDING ON CURRENT STOCK AT TIME OF SHIPMENT ** LOADS ON PULLEY BLOCKS A single sheave block used to change load line direction can be subjected to total loads greatly different from the weight being lifted or pulled. The total load value varies with the angle between the incoming and departing lines to the block. When these lines run parallel (0 degree angle between the incoming and departing lines), load on the block will be 2 times the line load. The following chart indicates the factor to be multiplied by the line load to obtain the total load on the block. Angle Factor Multipliers Angle Factor Angle Factor 0° 2.00 100° 1.29 10° 1.99 110° 1.15 20° 1.97 120° 1.00 30° 1.93 130° .84 40° 1.87 135° .76 45° 1.84 140° .68 50° 1.81 150° .52 60° 1.73 160° .35 70° 1.64 170° .17 80° 1.53 180° .00 90° 1.41 — — Caution: DO NOT EXCEED WORKING LOAD LIMIT OR 20% OF THE PRODUCT'S BREAKING STRENGTH. Indus Hardware assumes no responsibility for the use, misuse or misapplication of its products. Products are sold with the specific understanding that the purchaser and/or user are thoroughly familiar with their proper use.