Check the listing for details. 6" Digital Readout DRO Large LCD Readout Scale for Bridgeport Mill Lathe. Condition: New. Listed at 32.50 USD. 6" Digital Readout DRO Large LCD Readout Scale for Bridgeport Mill Lathe PRODUCT DESCRIPTION BRAND NEW 6" Digital Readout DRO Large LCD Readout Scale for Bridgeport Mill Lathe Max. Measuring Range: 6"/150mm Resolution: 0.0005"/0.01mm Tolerance Range: 0.0025"/0.06mm Accuracy: +/-0.001" (+/-0.01mm) Repeatability: 0.0005"/0.01mm LCD Display: 0.001"/0.01mm /64ths/inch On/Off, inch/mm/Fraction, Zero reset, Incremental/Absolute, Set Fractional reading in 64thincrement Can be used in Vertical,Horizontal or any position with the mounting hardware Zero point can be set anywhere along the full travel for comparing measurement No rack, pinion, or glass scale. Linear scale is safely embedded in the light weight aluminum scale body Micro USB connection port between the scale and the digital readout One end of wire is welded to electronic ruler, the other end is connected with a Micro USB cable connector and monitor Digital signal input terminal is a Micro USB interface, more reliable than the original SPC interface Features auto turn-off if sit idle to save battery power; when turn on the caliper at the same measurement coordinate (without changing the travel of the caliper) it will remember the numeric value of this coordinates before it auto turn-off Batteries Required: (2)3VCR2032 (NOT included Batteries) Shipping Weight: 10 oz Quantity: 1 Shipping:Small Item Shipping