Check the listing for details. 9" Ford 31 spline Cut to Length axle with bearing & hardware 33.0" long. Condition: New. Listed at 189.00 USD. Ford 9 Inch Cut to Length 31 spline axle and hardware, total length 33". Exactly the parts shown in the picture. Axles, PA20set bearings installed, axle retainers, t-bolts and 1/2" wheel studs. Big bearing 9" Ford Axle with 2.5" brake spacing.Flanged 31 spline axle has 3.15" tapered bearing installed Axles have inches of inner spline and you can cut the axle down to 2" of inner spline as the minimum.Long Axle is 33" long with 9.25 inches of inner spline. (Shortest usable length with 2" of minimum spline is 25.75")Axle has three bolt patterns in all axles, 5 x 4.5" small ford, 5 x 4.75" GM and 5 x 5".Hub register size is 3.06" OD for aftermarket brake rotors.Flange outside diameter is 5.94" OD.4 bolt axle retainers included; new style big ford (torino) with .375" (3/8") bolt holes or Old Style Big ford with .500" (1/2") bolt holes.1/2" press in wheel studs included for street or custom wheels.1/2" t-bolt or 3/8" t-bolt kit included depending on your choice of axle retainer.Axle can be cut to length with a cold saw or abrasive (chop) saw.SPECIFICATIONSlength 33" ( minimum length is 25.75").31 spline length 8"brake offset 2.5"hub register OD is 3.06" for aftermarket brake rotors.Flange OD is 5.94" Shipping; axle kit will ship via UPS Ground or Speedee Delivery in the upper Midwest WARNING: Cancer And Reproductive Harm- www.P65Warnings.ca.gov