Check the listing for details. AUTOOL® ATF Exchanger Automatic Gearbox Transmission Fluid Oil Exchange Cleaning. Condition: New. Listed at 1199.00 USD. Automatic Transmission Fluid Exchange and Transmission System Cycle CleaningThe cleaning and oil change of gearbox, hydraulic torque converter, gearbox heat dissipation and heat dissipation pipeline can be completed in 20 minutes, and the oil change of automatic transmission can be nearly 100%;The metal chips and oil sludge inside the gearbox can be completely removed without disassembly;The adjustable pressure design can adjust different pressures and flows according to different vehicle models;With separate cycle cleaning function, the maintenance is more thorough.Operation Instructions【Prepare for the first time to use】1) Check the accessories whether they are missing/damaged or not. 2) Fill up new transmission oil (around 12kg) into the new oil tank, keep the waste oil bottle empty.【Fill up oil from external tank】1) Insert the transparent connecting tube into the new external oil drum and point the switch "valve 1" to the "Exchanging" position, and switch "valve 2" to the "Extracting" position. 2) Connect the power cord to a fully charged 12V battery. 3) Turn on the power switch to start extract oil form external tank.【Cycle cleaning】1) Make sure that the car is in a braking state and lift the car safely. 2) Disconnect an ATF oil pipe that is convenient for disassembly and assembly on the car. 3) Find suitable connectors from the box and connect the red and blue oil pipes to the two ends of the removed oil pipe respectively. 4) Start the engine briefly and judge the direction of oil in and out. 5) Connect the oil outlet pipe of the car to the oil return pipe, and connect the oil inlet pipe of the car to the oil outlet pipe. 6) Connect a short transparent tube to the external oil inlet. Open the cleaning solution and insert the other end of the transparent short tube into the cleaning solution.7) Point the machine's valve 1 to "Exchanging" position, and valve 1 to "Extracting" position. 8) Turn on the power switch to start cycle cleaning. 9) After the cleaning fluid is completely injected, remove the transparent short tube. Turn off the power switch. Point the machine's valve 1 to "Cleaning" position, and valve 2 points to "Exchanging" position. 10) Start the engine. At this time, the machine is in cycle cleaning process, and the flow of used oil can be observed from the used oil windows. Switch gears during the cleaning process, each gear stays for about 5-10 seconds, and the cleaning is completed after 5 minutes Turn off the engine.【Oil exchange】1) After the cycle cleaning is over, point "Valve 1" to "Exchanging" position, turn on the power switch again, and start to inject new oil into the transmission. When oil flows through the new oil window, start the engine and the automatic gearbox starts to exchange used oil and new oil. 2) During the oil change process, observe the level of the new and used oil tanks. If the new oil is flowing slower than the used oil, use the valve on the oil return pipe to reduce the flow of the used oil to balance the flow rate of the new and used oil.3) Switch the gears during exchanging, each gear needs to stay for about 5-10 seconds.4) Pay attention to the color of used oil by observing used oil window. When the color of the used oil changes from dirty to the same color as the new oil, it means that the used and new oil has been exchanged. 5) Turn off the engine and connect the oil pipe of the transmission as it is, then start the engine again, check the transmission oil amount after switching to the P gear. If the oil amount is insufficient, replenish new transmission oil, also pay attention to check whether the pipelines are leaking oil. Test drive for about one kilometer and check again (Very important).EASYTO MOVE Mobile design, reasonable structure and easy operation.Wide Range of ApplicationsEquipped with a variety of special connectors, suitable for various types of automatic transmissions.Efficient and FastThe AUTOOL ATF 702 automatic transmission fluid exchanger can complete the cleaning and oil change of the transmission, torque converter, transmission radiator and heat dissipation pipeline in 20 minutes, and the replacement rate of the automatic transmission oil can be close to 100%.Adjustable electric pressure designATF702 can adjust the pressure and flow rate according to the needs of different models, easy and convenient operationCycle Cleaning for Automatic TransmissionAdopts the scientific method of cleaning first and then changing, so as to ensure that the transmission system is clean and the old oil is completely drained.Various Special ConnectorsAutomatic transmission fluid exchanger is equipped with a variety of special joints as standard, which can be used to clean various types of automatic transmissions produced in Europe, America and Japan. The ATF transmission fluid exchanger is equipped with various special connectors, which can clean various types of automatic transmissions produced in Europe, the United States and Japan. The quick connector is used to connect the radiator pipe of the gearbox, which is easy and fast to operate.VISIT OUR STOREMORE PRODUCTSMORE PRODUCTS 3 WARRANTY&SERVICEDelivery DetailsVISIT OUR STORE MORE PRODUCTS MORE PRODUCTS 3 WARRANTY&SERVICE Delivery Details1.We will ship according to your EBAY address but sorry that we can not accept P.O.BOX address. Please make sure it’s correct . This will help your product to be received safely and quickly! 2.International Buyers Please Note: 1) Please check with your country customs office to determine what these additional Import tariffs costs will be prior to bidding / buying. 2) It's the buyer's responsibility to complete clearance when parcel reached your Customs. We are Not responsible for buyers's local taxes, please consult local Customs for Tax Details. Customs rates vary from country to country, please understand. 3. Any further queries, please don't hesitate to email us. Thank you