Check the listing for details. [BUY 6 PAY 4]JAYO 1.1KG PLA Meta PETG SILK PLA+ ABS 3D Printer Filament 1.75mm. Condition: New. Listed at 8.85 USD. The following filaments are 100% neatly wound -- PLA/PLA+/PLA Meta/PETG /SILK PLA+ (ABS/TPU/PLA Marble is not included.) Filament Printing tempe Print speed Traction (KGF) Melting point Elongation at break Net weight Tolerance Length PLA 200-230℃ 50-100mm/s 11-16 7-9g/10min(190 ℃, 2,16 kg) 4% 1kg/Roll ±0.02MM 330M PLA+ 210-235℃ 50-100mm/s 9-12 4-8g/10min (190℃,2.16kg) 45% 1kg/Roll ±0.02MM 330M PLA Meta 180-200℃ 50-100mm/s 9-12 8-10g/10min (190℃,2.16kg) 35% 1kg/Roll 250g/Roll ±0.02MM 330M PETG 220-250℃ 50-100mm/s 8-14 6-11g/10min (220℃,2.16kg) 210% 1kg/Roll ±0.02MM 320M SILK 200-230℃ 30-60mm/s 6-8 4-8g/10min (190℃,2.16kg) 200% 1kg/Roll ±0.02MM 330M TPU 185-215℃ 20-40mm/s / 5-8g/10min (190℃,2.16kg) 600% 500g/Roll ±0.02MM 165M ABS 230-270℃ 50-100mm/s 6-11 12-19g/10min (220℃,10kg) 25% 650g/Roll ±0.02MM / About this item [Neatly wound] This product adopts 100% neat wire arrangement technology, fully mechanical winding, and strict manual inspection production. Ensure that JAYO filaments are neat and easy to feed. Say goodbye to the tangled issues and unstable printing process. [High precision display] High precision diameter 1.75mm, JAYO filament highly compatible with most FDM 3D printers, 3D pens, and drying cases. Its dimensional accuracy is ± 0.02 mm, which is easy to input into the printer and has a small error. [No blockage or bubbles] JAYO filament has the advantages of no blockage and no bubbles, as it is packaged and vacuum sealed in a transparent bag before drying for 24 hours. It can make your 3D printed objects more refined. [Wide compatibility] JAYO 1.75 mm 3D printing material is compatible with most FDM 3D printers on the market. So you can purchase any 3D printer you like, as long as you use JAYO filaments. [Recycled cardboard roll] Choosing environmentally friendly cardboard reels can reduce unnecessary waste and protect the environment through 3D printing. How to store:1.If you leave your printer idle for more than a few days, please retract the filament to protect your printer nozzle. 2.In order to extend the life of your filament, please put the unsealed filament back into the original vacuum bag and store in a cool and dry place after printing. 3.When storing your filament, please pass the loose end through the holes on the edge of the filament spool to avoid coiling, so that it will be fed properly for the next use.