Check the listing for details. Digirig - integrated digital modes interface for amateur radio. Condition: New. Listed at 59.97 USD. Digirig Mobile is a digital modes interface for amateur radio.This listing is for revision 1.9 using TRRS connectors. Backward compatible to rev 1.6combines audio codec, serial CAT interface and PTT switchsupports full featured CAT interface: PTT, bands, tuning etc. (not just VOX based PTT)uses a single USB connection to computer minimizing the cables messserial computer aided transceiver (CAT) port can be configured for logic levels, RS-232, CI-V or TX-500*permanently available independently from CAT port an open-collector PTT switch controlled by RTS signal of the COM port to interface HTs and mobile radiosaxillary connection points to CM108 codec – for simple Allstar homebrew node buildsuses widely supported CP2102 serial interface and CM108 audio codec (generic audio device – no driver necessary)small rugged aluminum enclosure ideal for mobile operationsinterfaces the transceiver using widely available 3.5mm jacks (TRRS) for simple homebrew cable buildsgrowing collection of pre-made cables including popular Icom, Yaesu, Elecraft, Baofeng, Xiegu transceiversisolation can be easily added using inexpensive USB isolator dongle*Notes regarding the interface configuration:PTT option is always available independently from CAT and it works with any radioCAT configuration is done with solder jumpers and can not be changed operationallyDigirig’s default configuration for serial CAT is 3.3V logic levels. If the interface is ordered together with the transceiver cables and there is no ambiguity the configuration will be changed to match the cables. Please use order notes field or follow up with the email if you have a specific preference.Learn more about CAT configurations*This listing does not include cables. The USB cable is a standard USB Type-C cord which must support both power/charging and data.* Please refer to digirig website for detailed information.