Check the listing for details. Gizmo Dorks PEI Sheet 1mm Thick 3D Printer Build Surface Ultem 1000, Made in USA. Condition: New. Listed at 10.95 USD. Made in the USA PEI (Polyetherimide) sheets provide a 3D printing build surface that requires no tape, slurry, or adhesive. ABS and PLA both stick extremely well to the surface, which eliminates the need for support rafts used for better adhesion. The printed 3D parts will adhere to the PEI surface on a heated bed, and it will release or pop off when cooling down.How to UseCut the PEI sheet to size by scoring with a hobby knife. Remove the blue protective film from the PEI sheet. If you purchased the bundle with the adhesive, then carefully apply the 3M 468MP Transfer Tape and use it to stick the PEI to the print bed. Both a sheet and strips of adhesive are included in each package.Once the PEI sheet is attached, re-level your print bed and you are ready to go!It helps to wipe the surface down with isopropyl alcohol, methyl alcohol, or soap in between prints. This will ensure the PEI is clean, and help adhesion. Light sanding with 2400 grit paper will also give the PEI sheet more life. Inside The selection of no adhesive includes one sheet of PEI. The selection of with adhesive includes one sheet of PEI and one sheet of 3M 468MP adhesive.