Check the listing for details. Hunter Geniune Replacement Handheld Ceiling Fan Remote Control for # K5579-01. Condition: New. Listed at 39.99 USD. Genuine Original Hunter Replacement for "Simple Connect" Remote Control #K5579-01 For Hunter Ceiling Fans Please note that remote # K5579-01 has been discontinued. There are two versions of the updated replacement available from Hunter:Black - part # K5579-02White - part # K6019-02 This is a direct replacement for remote #s: K5579-01 Wireless receiver not included Requires 3V CR2032 Battery (included) Original Part #K5579-01 FCC ID: IN2TX45 FREQ: 434 MHz Part #K5579 must match for compatibility. Please inquire if you're not sure. Pairing Instructions:Note: The remote must be paired before the fan will operate. Open the battery compartment and install the battery. Turn off the breaker that powers the fan. Leave power off for 1 minute and then turn back on. Within 3 minutes, press the pair button on the remote (inside the battery compartment). If pairing was successful, a single beep will sound. Replace the battery door and Phillips head screw.If it does not beep, turn off power to your fan, wait 1 minute then try again. If using the transmitter with multiple fans, repeat this process for each fan. If fan is a pull-chain model, please make sure that pull-chain control is set to High speed for remote to work correctly.