Check the listing for details. JAYO PLA Matte PETG PLA+ SILK ABS TPU 1.75mm Filament 1.1KG Spool Neatly Wound. Condition: New. Listed at 7.49 USD. The following filaments are 100% clean wound -- PLA/PLA+/PLA Meta/PETG /SILK PLA+ (ABS/TPU/PLA Marble is not included.) Filament Printing tempe Print speed Traction (KGF) Melting point Elongation at break Net weight Tolerance Length PLA 200-230℃ 50-100mm/s 11-16 7-9g/10min(190 ℃, 2,16 kg) 4% 1kg/Roll ±0.02MM 330M PLA+ 210-235℃ 50-100mm/s 9-12 4-8g/10min (190℃,2.16kg) 45% 1kg/Roll ±0.02MM 330M PLA Meta 180-200℃ 50-100mm/s 9-12 8-10g/10min (190℃,2.16kg) 35% 1kg/Roll ±0.02MM 330M PETG 220-250℃ 50-100mm/s 8-14 6-11g/10min (220℃,2.16kg) 210% 1kg/Roll ±0.02MM 320M SILK 200-230℃ 30-60mm/s 6-8 4-8g/10min (190℃,2.16kg) 200% 1kg/Roll ±0.02MM 330M TPU 185-215℃ 20-40mm/s / 5-8g/10min (190℃,2.16kg) 600% 0.5kg/Roll ±0.02MM 165M ABS 230-270℃ 50-100mm/s 6-11 12-19g/10min (220℃,10kg) 25% 650g/Roll ±0.02MM / How to store:1.If you leave your printer idle for more than a few days, please retract the filament to protect your printer nozzle. 2.In order to extend the life of your filament, please put the unsealed filament back into the original vacuum bag and store in a cool and dry place after printing. 3.When storing your filament, please pass the loose end through the holes on the edge of the filament spool to avoid coiling, so that it will be fed properly for the next use.