Check the listing for details. Ladder Hardware Kit - MAKES YOUR LADDER STAND UP! Library Loft Cabin. Condition: New. Listed at 60.00 USD. Welcome to CountryNeighbors•comA family owned and operated company making LOG HOME FURNISHINGS since 1996.We have had such a positive response to our Library Ladder design, we offer a LADDER HARDWARE KIT to convert YOUR OWN ladder to STAND UP against the wall! See our ladder ad on eBay if you need a ladder also, search: "CUSTOM LOFT LADDER" P.C.: We offer POWDER COATING!!! Comes Satin-Black or Gloss-White, extra $20/ft. Powder Coating is AMAZING stuff. Very durable, silky-smooth and just the right slipperiness you need between the metal surfaces. ABOUT THIS KIT: 1. Makes your ladder STAND UPRIGHT when not in use.2. Slides up/back (and right/left if you order a wider bar).3. Easily lifts off the bar! Or check out our "C" brackets. Our Brackets are heavy-duty 1/4 x 3/4 strap steel (load tested to over 500lb) and we use special pipe that DOES NOT show the threads! This design is so simple, functional and affordable. BRACKET TYPE: tell us which type, (J,L,C or CL) when you purchase. What type of brackets do you need? See last photo. they ALL make the ladder stand up. ;o) You want Js if the ladder extends ABOVE the loft (when fully pulled out)You want Ls if the ladder is BELOW the loft (when fully pulled out)You want either C or CL (same as above only NOT easily removable). How to figure Bracket Length of travel:1. Pull your ladder out to the preferred angle, and (make a mark on the loft edge if the ladder DOES NOT extend past the loft for "L" Type brackets or) make a mark on the back of the ladder...2. Then hold your ladder straight up and measure the difference.3. We will add three inches to that measurement to be SAFE! ;o) BAR Width:You can tell us just the width you want --->1. Just the bar width. We will add the fittings to that (about 4.25 inches). Or...2. Tell us the total END-to-END measurements, Or...3. If you need to hit a stud, tell us STUD-to-STUD width. Comes with:All the lags you need and a lag-driver.1/4" thick felt pads for the bottom of your ladder. FELT IS BETTER! NO CASTERS TO SCRATCH YOUR HARDWOOD FLOOR! Bar and fittings come fully assembled. All you need is a drill/driver and a ladder! IDEA! ----> A lot of customers are buying our bars as GRAB-BARS at the top. So order the extra footage for this and tell us what you want. EG: If you want a 2ft horizontal bar for your ladder and two 2ft vertical bars for the top, order 6ft and tell us what you want. ;o) If you need 8ft or more width on the bar, we suggest you order "Kit w/o pipe" and buy a 3/4" black-iron pipe locally. S/H:$10 flat fee!!!