Check the listing for details. Manifold Hot Tub Spa Part 16 3/4" Outlets Glue and Coupler Kit Info Video. Condition: New. Listed at 139.99 USD. See the Informational video here first. This Kit is a (1) 2" Dead End X 2" Slip X (6) 3/4" Barbs manifolds and (1) 2" Spigot/Street X 2" Slip X (6) 3/4" Barbs manifold, (1) 2" Spigot/Street X 2" Slip X (4) 3/4" Barbs, manifold Connect Barbs, clamps, Glue with a Coupler Kit. For a limited Time we are offering a Free Vinyl Tubing Cutter that cuts 1/4" to 1" Clear Tubing and is perfect for doing these Manifold replacements.. Limit one per order.. The Kit consists of 14 Barbs with (3) Manifolds total (2) with (6) 3/4" Barbs and (1) 2" (2) 3/4" Barbs manifold totaling 16 Outputs, (2) 3/4" Plugs to cut the manifolds down to 15, 14 or 13 outputs, a 2" Coupler, 6" of 2" Soft Pipe, (28) 3/4" Clamps, 4oz Blue Glue, 4oz Purple Primer and 48" of Clear 3/4" Tubing so you have about 3" per extension. The kit is to be used to replace a broken manifold and extend the output side tubes and use the coupler to spin it to win it on the old pipe and then glue the 6" piece of 2" Flex in and then glue the manifolds in from there. The Manifold receives a 2" pipe or fitting on one side and then slips inside of a 2" fitting on the other side. Note: 2" PVC parts measure 2 3/8" ID or 2 3/8" OD..See the Informational video here first. This Kit is a (1) 2" Dead End X 2" Slip X (6) 3/4" Barbs manifolds and (1) 2" Spigot/Street X 2" Slip X (6) 3/4" Barbs manifold, (1) 2" Spigot/Street X 2" Slip X (4) 3/4" Barbs, manifold Connect Barbs, clamps, Glue with a Coupler Kit. For a limited Time we are offering a Free Vinyl Tubing Cutter that cuts 1/4" to 1" Clear Tubing and is perfect for doing these Manifold replacements.. Limit one per order.. The Kit consists of 14 Barbs with (3) Manifolds total (2) with (6) 3/4" Barbs and (1) 2" (2) 3/4" Barbs manifold totaling 16 Outputs, (2) 3/4" Plugs to cut the manifolds down to 15, 14 or 13 outputs, a 2" Coupler, 6" of 2" Soft Pipe, (28) 3/4" Clamps, 4oz Blue Glue, 4oz Purple Primer and 48" of Clear 3/4" Tubing so you have about 3" per extension. The kit is to be used to replace a broken manifold and extend the output side tubes and use the coupler to spin it to win it on the old pipe and then glue the 6" piece of 2" Flex in and then glue the manifolds in from there. The Manifold receives a 2" pipe or fitting on one side and then slips inside of a 2" fitting on the other side. Note: 2" PVC parts measure 2 3/8" ID or 2 3/8" OD..