Check the listing for details. Novagard Novaflex Metal Roof & Panel Caulk Adhesive Sealant. Condition: New. Listed at 18.99 USD. A single-component, low-odor silicone used to seal seams and fill joints. NovaFlex Metal Roof & Panel Adhesive Sealant cures to most materials without corroding, drying to a durable, rubber-like solid that is utterly impervious to UV light, so will never chalk or fade. This general purpose compound provides unbeatable adhesion to metal, coated metals, wood, masonry, PVC, and most common construction materials. - Great for exterior and interior sealing- Permanently flexible- Will not shrink or crack- Waterproof- Tack-free in 10 minutes, completely cured within 48 hours- No solvents or odor- Will not freeze- Easily gunned at all temperatures Product SpecificationsAPPEARANCEVISCOSITYEXTRUSION RATE1/8” ORIFICE @ 50 PSISKIN OVER TIME3/8” @ 50% RH & 77°FTHROUGH CURE3/8” @ 50% RH & 77°FPaste (Various Colors)3,500 – 7,000 poises (Brookfield #7 @ 10 rpm) (Type I – Class 35)4,500 – 8,000 poises (Brookfield #7 @ 10 rpm) (Type II – Class 50)30 – 80 grams/minute5 – 10 minutes48 hours (14 days for OEM window applications)Typical Properties SLUMP (FLOW)SPECIFIC GRAVITYTENSILE STRENGTHASTM D412ELONGATIONASTM D412TEAR RESISTANCEASTM D624SHORE HARDNESSASTM D2240SERVICE TEMPERATUREAPPLICATION TEMPERATUREADHESIONASTM D903PEEL STRENGTHSTM C974GREEN STRENGTHASTM C1135JOINT SEALANT DESIGNATIONASTM C920No Slump1.00 – 1.05 (Type I – Class 35)1.15 – 1.25 (Type II – Class 50)140 – 200 psi (Type I – Class 35)170 – 220 psi (Type II – Class 50)500 – 650% (Type I – Class 35)800 – 1,000% (Type II – Class 50)30 – 35 pli20 +/- 5 (Type I – Class 35)25 +/- 5 (Type II – Class 50-40°F to 400°F (-40°C to 204°C)-20°F to 160°F (-29°C to 71°C)Glass: 12 – 15 pli Aluminum: 10 – 14 pli Vinyl: 12 – 15 pli----Type S, Grade NS, Class 35/50, Use NT, M, G, A, and OPrefer to purchase by the case instead? Check out our case listing here.https://www.ebay.com/itm/355133096861