Check the listing for details. PARTING TOOL CUT OFF HOLDER 10MM, 12MM, 3/4", 1" SHANK FOR LATHE. Condition: New. Listed at 24.93 USD. Parting( as the name suggests to cut-off something). Parting Tool Holder uses a blade-like cutting tool plunged directly into the workpiece to cut off the workpiece at a specific length. Normally used to remove the finished end of a workpiece from the bar stock that is clamped in the chuck Lathe Clamp Type Parting Cut Off Tool Holder 10mm Shank With HSS Blade 1/2"SHANKBODY SIZEBLADE SIZEinchmminchmminchmm3/8102-1/8 x 15/16 x 155 x 24 x 253/32 x 1/2 x 42.5 x 12.7 x 100 Lathe Clamp Type Parting Cut Off Tool Holder 12mm Shank With HSS Blade 3/4"SHANKBODY SIZEBLADE SIZEinchmminchmminchmm1/2122-1/8 x 1-3/16 x 1-1/855 x 30 x 281/8 x 3/4 x 63.1 x 19 x 150 Lathe Clamp Type Parting Cut Off Tool Holder 12mm Shank With HSS Blade 24mm SHANKBODY SIZEBLADE SIZEinchmminchmm mm1/2123-7/16 x 1-5/8 x 1-1/287 x 43 x 37 4 x 24 x 150 Lathe Clamp Type Parting Cut Off Tool Holder 3/4" Shank With 3/16" x 1" x6"Blade DESCRIPTION SHANKBODY SIZEBLADE SIZEinchmminchmminchmm3/4194-3/8 x 1-3/2 x 1-1/2110 x 42.8 x 37.93/16 x 1 x 64.7 x 25.4 x 150 Lathe Clamp Type Parting Cut Off Tool Holder 1" Shank Takes HSS Blade 1-1/4" DESCRIPTIONSHANKBODY SIZEBLADE SIZEinchmminchmminchmm1252 x 1 x 4-3/850 x 25 x 1111-1/4"32 Versatile tool for rigid clamping for heavy duty cuts Can be used on front or rear tool posts black shining finish