Check the listing for details. Quarch QTL1999 HD Programmable Power Module. Condition: Used. Listed at 1299.00 USD. Quarch QTL1999 HD Programmable Power Module + Triggering + IEC Cable, USB Cable, Output Cable + Injection Power Cable PRODUCT DETAILSReplace your bench power supplies, scope and current probes with this powerful and cost-effective alternative: A fully programmable power supply and measurement tool with 12V, and 5V or 3V3 outputs.HD modules take all the benefits of the XLC module plus multiple improvements including a high-density option, performing full power margining from 0V to nominal +20%, with complex voltage ramps, glitches and more.The HD module can perform accurate current measurement at the same 100uA level as the XLC, has eight times the memory buffer and faster streaming modes.250KHz sampling allows capture of accurate voltage, current and power data.The modules also support advanced fixtures and LAN control.FEATURESThis HD Power Module is a flexible power margining and measurement tool and a significant upgrade on the XLC module. This version has 12V and 5V (switchable to 3V3) outputs and is ideal for SAS, SATA and PCIe based devices. The outputs can be set automatically when used with advanced Quarch fixtures.Each rail can be programmed from 0 to 120% of its nominal voltage. The voltage and current of each output can be simultaneously recorded to provide accurate power consumption measurement.The module allows programming of arbitrary voltage output waveforms which can be used to simulate power-up ramps, power failures, noisy power sources and much more. Patterns can be created over a range of microseconds to minutes, allowing a wide range of testing options.A high-speed record feature provides an oscilloscope-like function to record the output voltage, current and power consumption of the attached device.A range of injection fixtures allow the module to inject power into a variety of devices.Dual outputProgrammable output waveformsFlexible power marginingHigh-speed measurement and recordingEasy measurement of voltage, current and powerSimultaneous sampling of voltage and current on both outputsAccurate power consumption measurementExternal triggering option availableSimple test automation from any standard scripting languageSupports advanced power injection fixtures.TECHNICAL0?6V and 0?14.4V outputs3A continuous output current at nominal voltage1uS pattern step resolution0.6V/uS output slew rate (no load)250kSps measurement sampling rate± (2 mA + 1%) @ 1?3000mA accuracy± (2 uA + 2%) @ 100uA?1mA accuracyUSB and LAN control options64Mbit memory depth2x SMA triggering connectors.TRIGGERING SPECIFICATION2x triggering connectors3.3 volt triggerStart/stop pattern on external triggerStart/stop measurement on external triggerTrigger out on power/current thresholdTrigger out on pattern startTrigger out on measurement start.