Check the listing for details. Sea Hawk Paints AF-33 Self-Polishing Bottom Paint. Condition: New. Listed at 56.88 USD. AF33 is a harder ablative (self-polishing) antifoulant, yielding a more durable finish on all types of vessels. With it’s premium multi-season protection at a single-season price, AF33 is the choice for discerning captains of workboats, day sailors and serious cruising vessels.Highest grade of cuprous oxide available (more potent active ingredient)Harder ablative finishExceptional value multi-season coatingConsistent viscosity providing better flow and rolling abilityLloyd’s Register certified*This Item Ships From Florida Please Note: This item is not available to ship to the following states: Arizona, Arkansas, Colorado, Idaho, Indiana, Iowa, Kansas, Montana, Nebraska, Nevada, New Mexico, North Dakota, Oklahoma, Utah, Vermont, West Virginia, and Wyoming. Sea Hawk Paints AF-33 Product InformationColors: Black 3345, Blue 3342, Dark Blue 3330, Red 3341, Green 3343Finish/Sheen: Semi-GlossCopper Content: 33.6% (629 g/l) all colorsVolume Solids: 56% ± 2%Shipping Weight:Black - 15.53 Lbs/Gal (7.04 kl/Gal)Blue - 15.58 Lbs/Gal (7.06 kl/Gal)Red - 15.99 Lbs/Gal (7.25 kl/Gal)Dark Blue - 15.74 Lbs/Gal (7.13 kl/Gal)Green - 15.39 Lbs/Gal (6.98 kl/Gal)*All colors are not available in all statesFlash Point: 100°F (38°C)VOC: 398 Grams/LiterTypical Film Thickness: Pleasure craft: 2.5 mils (63.5 µ) dry film thickness (DFT) per coat, (4.5 mils (114.3 µ) wet film thickness (WFT)), 2 coats on the entire hull, and a 3rd at the waterline and other high wear areas. Pleasure craft (California/Reduced CU2O Leach Rate Application): 2.5 mils (63.5 µ) dry film thickness (DFT) per coat, (4.5 mils (114.3 µ) wet film thickness(WFT)), 2 coats on entire hull. Commercial Marine: 3.0-5.0 mils (76.2-127 µ) DFT per coat by spray application (5.4-8.9 mils (137.16-226.06 µ) WFT), 2 coats on entire hull and a 3rd at the waterline and other high wear areas.Theoretical Coverage: 359 sq.ft./gal. (33.35 m2) at 2.5 mils dry film thicknessShelf Life: 30 months when stored under cool, dry conditions Application DataMixing: AF-33 bottom paint contains a moderate concentration of copper oxide and may have settled in transit. The product must be thoroughly mixed with a power mixer/shaker until uniform.Induction Time: Not ApplicableThinning: If necessary, maximum 10%Sea Hawk Sea Hawk 2033 Thinner, 2035Cleaning: Sea Hawk 2033 Thinner, 2035, XylenePot Life: Not ApplicableBrush/Rolling: Solvent Resistant Roller Cover 3/8" pile (nap), smooth to medium. Prewash roller cover to remove loose fibers prior to use.Airless Spray: Minimum 33:1-2 GPM ratio pump; -0.017-0.026" orifice tip; 3/8" ID high-pressure material hose; 90 PSI line pressure; 60 mesh filter. Sea Hawk Paints AF-33 Surface PreparationPaint only clean, dry surfaces. Remove all grease, oil, wax, or other foreign material by solvent or detergent washing. (SSPC-SPI). Best to Use Sea Hawk Wax n Grease Solvent Wash S-80 or Low VOC DE-Waxing Etch & Cleaner S-90.Compatibility: For pleasure craft applications, please refer to our Sea Hawk Compati-bility Chart to ensure compatibility when applying AF-33 antifouling paint over existing bottom paint.Previously Painted Surfaces: Sea Hawk Paints AF-33 is suitable for application over previous painted surfaces per compatibility check. For correct procedures please refer to the Application Guidelines for Fiberglass/Gelcoat.Fiberglass or Vinyl Ester Hulls: Sea Hawk AF33 is suitable for this substrate. For correct pro-cedures please refer to the Application Guidelines for Fiberglass/Gelcoat.Wood Surfaces: New Work - Sand the wood surface with 80 grit sandpaper, remove the sanding dust with Sea Hawk S-90 Cleaner, allow to dry and apply the first coat of AF-33 bottom paint. Reduce the first coat (only) 20% with Sea Hawk 2033 Thinner to maximize surface penetration. Next, apply whatever seam compound if needed, allow to dry in accordance with the product label and apply two more coats of AF-33 without any Thinner reduction.Aluminum: AF-33 Antifouling paint may be used on an aluminum hull only when used with the proper barrier coat system described in Technical Bulletin AL1284. AF-33 is not to be used on bare aluminum.Steel Vessels: Sea Hawk AF-33 antifouling paint is normally used as part of a paint system for underwater hull areas on steel vessels. Nominally, AF-33 is applied over a properly cleaned existing surface of another antifouling paint or sealer. The surface must be clean and dry prior to application, free of all surface contamination. We highly recommend the hull bottom be high pressure water washed immediately upon haul out with 2,500-3,000 psi clean fresh water. Some areas may need to be cleaned in accor-dance with SSPC-SP-1 Solvent Cleaning to ensure all oils, grease, and other contami-nants are removed. Please refer to additional data below and the section on recom-mended systems for steel below.Additional Data For Painting Steel Hulls: If the surface to be painted is also to be repaired with an epoxy primer system, we recommend the area first be grit blasted to SSPC-SP-10 ‗near white metal‘, cleaned free of dust and blast media and primed in ac-cordance with the primer system specifications. Please refer to the specified primer data sheet for application details. Make sure the first coat is applied within the proper over coating window of the last coat of epoxy primer which is normally while the epoxy is still tacky but cannot be removed with the thumb. Apply at least two coats of antifou-lant for best performance. See Technical Bulletin STL45 for detailed information. For any questions please contact Bottom Paint Store.