Check the listing for details. Silver Gloss Metallic Chrome Print-Treated Perm Self-Adhesive Polyester Film S2. Condition: New. Listed at 5.99 USD. This product is compatible with Solvent, Eco-Solvent, Latex, and UV inkjet Printers ONLY Please make sure you have this type of printer before you order this product.If you're not sure please message us and we will help. We respond very promptly.2.0 mil silver metallized is a print-treated polyester film coated with permanent acrylic pressure sensitive adhesive on a 90# layflat liner. This polyester film is designed to accept a variety of UV curable and solvent-based screen inks. May also be used with flexographic, offset, and letterpress inks but must be tested prior to use. The 90# liner offers good dimensional stability over a range of environmental conditions resulting in excellent sheet printing. This product is designed for permanent decals and nameplates requiring adhesion to a variety of substrates ranging from clean metal, painted metal, glass, styrene and low surface energy plastics such as polypropylene and polyethylene. May also be applicable to certain powder coated metal finishes. Please note: this film is not designed to go around curves. It's made for flat surfaces only. This film has a peel n' stick adhesive FILM Film Type Metallized Polyester Film Thickness (mils/μm) 2.0 mil / 51 μm (+/- 10%) Film Weight (gsm) 70 Gloss (60°) ≥90 Opacity (%) 99 ADHESIVE Adhesive Type Permanent Adhesive Color Clear Adhesive Thickness (mils/μm) 0.8-1.0 mil / 20-25 μm Peel Strength on Stainless Steel (lbs/in) / (N/25mm) 15 min 2.5 / 11 Peel Strength on Stainless Steel (lbs/in) / (N/25mm) 24 hrs 3.8 / 17 LINER Liner Weight (#/gsm) 90 / 145 (+/- 10%) Liner Type White 2-Sided PE-Coated Kraft Liner Thickness (mils/μm) 6.7 mil / 170 μm Release Force @ 300” / min (g/2”) 50-150 PERFORMANCE GUIDANCE Application Temperature ≥ +50 degrees F Service Temperature -40 to 250 degrees F Shelf Life 1 year Storage Temp / Rel. Humidity 70 degrees F / 50% Outdoor Durability Up to 2 yearsThis product is compatible with Solvent, Eco-Solvent, Latex, and UV inkjet Printers ONLY Please make sure you have this type of printer before you order this product.If you're not sure please message us and we will help. We respond very promptly.2.0 mil silver metallized is a print-treated polyester film coated with permanent acrylic pressure sensitive adhesive on a 90# layflat liner. This polyester film is designed to accept a variety of UV curable and solvent-based screen inks. May also be used with flexographic, offset, and letterpress inks but must be tested prior to use. The 90# liner offers good dimensional stability over a range of environmental conditions resulting in excellent sheet printing. This product is designed for permanent decals and nameplates requiring adhesion to a variety of substrates ranging from clean metal, painted metal, glass, styrene and low surface energy plastics such as polypropylene and polyethylene. May also be applicable to certain powder coated metal finishes. Please note: this film is not designed to go around curves. It's made for flat surfaces only. This film has a peel n' stick adhesive FILM Film Type Metallized Polyester Film Thickness (mils/μm) 2.0 mil / 51 μm (+/- 10%) Film Weight (gsm) 70 Gloss (60°) ≥90 Opacity (%) 99 ADHESIVE Adhesive Type Permanent Adhesive Color Clear Adhesive Thickness (mils/μm) 0.8-1.0 mil / 20-25 μm Peel Strength on Stainless Steel (lbs/in) / (N/25mm) 15 min 2.5 / 11 Peel Strength on Stainless Steel (lbs/in) / (N/25mm) 24 hrs 3.8 / 17 LINER Liner Weight (#/gsm) 90 / 145 (+/- 10%) Liner Type White 2-Sided PE-Coated Kraft Liner Thickness (mils/μm) 6.7 mil / 170 μm Release Force @ 300” / min (g/2”) 50-150 PERFORMANCE GUIDANCE Application Temperature ≥ +50 degrees F Service Temperature -40 to 250 degrees F Shelf Life 1 year Storage Temp / Rel. Humidity 70 degrees F / 50% Outdoor Durability Up to 2 years