Check the listing for details. Siser EasyWeed Iron On Adhesive 12" Roll (Yard) **FREE SHIPPING**. Condition: New. Listed at 6.18 USD. EasyWeed® AdhesiveCreate Shining Decorations For Less!Shining statements, multicolor combinations, and so sew projects can all be achieved with EasyWeed Adhesive! Compatible with cost-effective screen printing foils and other materials that lend themselves to adhesion, this adhesive is a money saver and a money maker! Even on its own, EasyWeed Adhesive creates a glazed tone on tone appearance that's trending. The milky colored adhesive features a pressure sensitive carrier and low application temperature that's gentle enough for almost all heat sensitive fabrics. Cutting EasyWeed Adhesive is like any other EasyWeed product with the shiny, carrier side face down and image mirrored. For best visibility while weeding, we suggest placing the adhesive on a dark surface.EasyWeed Adhesive is CPSIA Certified so it can be used for decorating children’s clothing and apparel.Specifications:PET Composition • Pressure sensitive backing • Semi-gloss finish • 75 Microns/2.95 Mils• 45°/60° blade • Should be layeredCUTTER SETTINGSCricut:Blade: StandardSetting: Iron-OnSilhouette Cameo:Blade: Standard, 3Material: Heat Transfer, SmoothSpeed: 8Force: 6Scan N Cut:Blade: Standard, 2Cut Speed: 1Cut Pressure: 1Roland GS/GX-24:Blade: 45°Gram Force: 80-90Offset: .250Speed: 25-50 cm/sGraphtec:Blade: 45°Gram Force: 9-10Tool: CB09U+0Speed: 30 cm/sMH, SC2, LP3, Titan 1:Blade: 45°/60°Gram Force: 80-85Speed: 300 mm/s*Blade Advancing VariesTitan 2 & 3Blade: 45°/60°Gram Force: 60-65Speed: 300mm/s*Blade Advancing VariesSettings may vary based on blade condition and age of machine.Always perform a test cut prior to cutting designs.APPLICATION INSTRUCTIONSApplication Instructions (home iron)• Set iron dial between Cotton and Linen• Cover design with Kraft paper or non-stick cover sheet• Place on flat, hard surface (ironing board not recommended)• Press iron with medium/firm pressure (do not slide iron)• Press each section of design for 10-15 seconds• If areas of design lift after application, replace cover sheetand re-press for 5 seconds• Peel carrier hotApplication Instructions (heat press)• Cut in Reverse• Weed excess material• Preheat garment for 2-3 seconds• Apply design at 275°F/135°C• Use medium pressure for 5-10 seconds• Peel carrier hotRECOMMENDED ACCESSORIES & CAREEasyWeed Adhesive Applies to:100% cottonPoly/cotton blends100% polyesterRecommended Accessories:Siser WeederLaundering:Wait 24 hours before 1st washMachine wash cold / mild detergentDry on normal dryer settingDo not dry clean