Check the listing for details. US MFG Hylift Johnson B2303S Slow Leak Lifters set of 4 fit 1985-1999 Harley EVO. Condition: New. Listed at 175.99 USD. Set of 4 B2303S US manufactured Hylift Johnson Performance Slow Leak Down Lifters fits 1984-1999 Harley 1340cc Evo These parts have an “S” designation after their part number. So a Slow Design part number will look like A-0817S. These Lifters have a Leak Down on the upper end of the scale from 90 to 120 seconds. In a performance application these lifters will actually act like a mechanical lifter with very little effective loss of valve lift or duration at any RPM. Just like the “R” Lifters these have a much smaller Leak Down range that will also balance all of the cylinders to each other. These lifters are very hard to produce because the TOTAL clearance between the I.D. of the Body and the Piston assembly is reduced to less than 0.000120”, or 1/30 of a human hair. These are like super heavy duty shocks and can handle higher spring pressures without collapsing like the standard and “R” lifters. The only draw back of this type of lifter is that if the valve train should “Float” because of reaching a higher RPM than the valve springs can handle these lifters will try to take up the excessive clearance causing the valve to hang open resulting in a loss of power. Because these are Hydraulic lifters there is no lash or additional adjustment needed and the full cam profile is translated to the valves. In testing, not only did these lifters result in more power and higher RPM reading over other Hydraulic lifters they also reduced valve train wear and failure compared to mechanical lifters. In an effort to reduce the occurrence of "Porch Piracy", please consider changing your shipping address to a commercial address if no one is at home for delivery. The shipping companies are not responsible for missing shipments once an item is marked "delivered". Thank you.