| All returns accepted | ReturnsNotAccepted |
|---|---|
| Connector Type | MC-4 |
| Custom Bundle | No |
| Current Type | AC/DC |
| Material | Chemically crosslinked polyethylene |
| Power Source | Solar |
| Type | Solar Panel Kit,Solar Panel Cable Connection Adapter |
| Features | All Daylight Conditions |
| Wire Gauge | 10 |
| Color | Black |
| MPN | Does not apply |
| Recommended Environment | Outdoor |
| Item Length | as selected |
| Brand | southwire |
| Application | Agriculture/Farming |
| Charging Mode | MPPT (Maximum Power Point Tracking) |
| Resistance Properties | Low Voltage Protection |
Check the listing for details. 1 Pair Black & Red High Quality Solar Panel Extension Wire & Connectors 10 AWG. Color: Black, Condition: New. Listed at 12.00 USD. 1 Pair Black & Red High Quality Solar Panel Extension Wire & Connectors 10 AWG *US Seller and fast shipping *100% New, High quality*Insulation Jacket, Chemically crosslinked polyethylene, Sunlight resistant *Anti-ultraviolet, flame retardant, high temperature resistance, low resistance, conductive stability*Resistant to pressure, folding and flexibilityWhat is included:One piece black solar cable + one piece red cable solar cable terminated with Solar Connectors.Application 600 Volt power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. SpecificationsSIZE (AWG OR KCMIL)10 AWGNO. OF STRANDS19INSULATION THICKNESS (MILS)75milsNOM. OD (MILS)263milsNOMINAL TOTAL WEIGHT (LBS/1000')53lbs/1000' Standards & References ASTM B3 Standard Specification for Soft or Annealed Copper WireASTM B8 Concentric-Lay-Stranded Copper ConductorsUL 44 Thermoset-Insulated Wires and CablesUL 1685 FT4 Vertical-Tray Fire Propagation and Smoke Release TestICEA S-58-679 Control Cable Conductor Identification Method 4ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical EnergyIEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray TestConstructionConductor:Class B compressed stranded bare copper per ASTM B3 and ASTM B8Insulation:Cross Linked Polyethylene (XLPE) Type XHHW-2Overall Jacket:Polyvinyl Chloride (PVC) Jacket