Check the listing for details. 1 Set Dental orthodontic Adhesive Super Bond light cure paste, primer, etching. Condition: New. Listed at 28.18 USD. 1 Set Dental orthodontic Adhesive Super Bond light cure paste, primer, etching Descriptions: Product name: Dental orthodontic Adhesive Packaging: Paste 3.5g×3pcs Primer 8.0ml×1 bottle Etching 2.5ml×1pcs Accessories LIGHT CURE ADHESIVES INSTRUCTION Total: 1 Box Warning: Primer and adhesive contains acrylatemonomers. Acrylate monomers are known to produce allergic skin reactions in certain sensitive individuals. May causeeye and skin irritation. Precautions: Avoideyeand skin contact. Weargloves henhandlingthis material. First aid: Eye contact: Immediately flush with plenty of water. See a physician ifirritation persists. Skin contact: Wash affected area with soap and water. See a physician ifirritationpersists. Precaution: Please follow manufacturer's directions on the handling, proper use and recommendations for eye protection, when using a curing light. Indications for Use: A: Toothpreparation: 1.Prophyteethwithanoil-freepumiceorpaste.Rinsewithwater 2.Isolate teeth. 3.Air dry thoroughly using oil and moisture-free air source. B: Acid etching: Apply etching gel to tooth, surfaces following the instructions provided with the etching gel delivery system. Ifusing other gel etching systems consult themanufacturer's instructions forpropertechniqueand ecommendedetchingtimes. C: Priming: 1. Airdrytooththoroughly. 2. Place small amount of primer in well. Apply thin uniform coat of primer on each tooth surface to bebonded. Note:' since primer acts as a wetting agent, only a very thin film of primer is ecessary. D: AdhesiveBonding Jith the syringe apply a small amount of paste onto bracket ase. Use sparingly. Then completed wipe syringe tip clean and replace cap. Placement and Curing Immediately after applying adhesive, lightly place bracket onto tooth surface. Adjust bracket to final position, press firmly to seat bracket. Gentlyremove excess adhesivefromaround thebracketbase without sturbing thebracket. Hold the curing light stationary at a distance of 2-3 mm to light about seconds in each ackets left and right. Storageand Use Don't expose materials to elevated temperatures or intense light.Bring to mtemperaturepriortouse. y inhibit the proper adhesive curing. This system is designed to be used at room temperature. FLight Sensitive helf life at room temperature is per the expiration date on thekit box, ate inventory to optimize shelf life.