Check the listing for details. 2 oz Jar Water Base Graphite Conductive Paint for Copper Electroforming Supply. Color: Black, Condition: New. Listed at 34.99 USD. Water Base Graphite Conductive Paint. Use to create copper electroformed creations. Cu Electroforming Starter Kits are available too! *PLEASE NOTE: This is different than the alcohol based conductive paint that I also offer* 2oz Water Base Graphite Conductive Paint for Electroforming:Water based graphite conductive paint (optional add on for a set with a clear polyurethane lacquer for sealing organics and gemstones)Stir very well before each use, do not violently shakeBrush, dip, or spray onThins with Distilled Water (NOT tap or bottled) Do not over thin your paint! It will decrease conductivity 2 oz jarWear protective gloves Apply 2 - 3 coats, 10 to 20 min between each coat of paintUse a sealant or lacquer before applying paint to organic and porous items24 hour cure timeCleans with soap and water* Thoroughly stir conductive paint from the bottom of the jar until smooth. Conductive particles will settle again within 8-12 hours, so stir well each time before using this paint.Do not vortex or violently agitate/shake the paint jar, as air entrapment or foaming may cause separation.Electroforming is perfect for a maker or crafter that enjoys creating jewelry, art, or loves science and chemistry! Makes a wonderful unique gift. Create designs using real leaves and nature items, gemstones, crystals, glass, plastic, bone, 3-d printed parts, and pretty much anything you can think of! Only use with solution that is for electroforming! Graphite conductive paint does not work when using solution that is labeled "Copper Sulfate II", which is just water and copper sulphate and is NOT FOR ELECTROFORMING! Follow instructions included, and contact me if you're experiencing issues for troubleshooting. Please note that due to this item containing chemical liquids, it is non-returnable/non-refundable