| Brand | SENDERPICK |
|---|---|
| Custom Bundle | No |
| Engine Type | 2-Stroke |
| Type | Gasoline Powered |
| Fuel Type | Gasoline |
| Fuel Tank Capacity | 0.9L |
| Engine Size | 32.7 cc |
| Maximum Power | 1.2 HP |
| Maximum Torque | 1.45 Nm |
| Starter System | Hand Pull |
| Items Included | Funnel, Oil Can, Toolkit, Conversion Head, Chisel |
| Applications | Fencing, Star pickets, Posts, Stakes,Pipe driving |
| Material | Aluminum |
| Size | 55*27*31cm (21.65*10.62*12.20inch) |
| Engineer Type | 36X32mm, Single Cylinder |
| Impact Frequency | 1200~2200BPM |
| Impact Energy | 25-50J |
| Maximum Post Diameter | 70 mm |
| Pilling head size | Φ55mm, Φ70mm |
| Maximum piling size | 70 mm |
| Max power and speed | 900W/8500r/min |
| Max torque and speed | 1.45N.m/5300r/min |
| Fuel onsumption rate | ≤0.5L/h |
| One function tool holder | Sleeve |
| Net Weight | 13kg (pile driver)/11.8kg (demolition hammer) |
| UPC | 756804819750 |
Check the listing for details. 2 Stroke Gas Powered T Post Driver Fence Pile Driver Jack Hammer w/Chisel 32.7cc. Condition: New. Listed at 248.46 USD. Notes The carburetor must be cleaned after every 100 hours of operation. The air filter sponge must be cleaned after 36 hours of operation. Before use, please carefully read the English manual and follow the precautions. If not used for a long time, the fuel and oil must be cleaned out of the tank and packed in a plastic bag to avoid dust and moisture entering the machine and affecting its use. Pay attention to whether the oil inlet pipe is full of oil before use. After starting up, you need to empty the throttle and let the machine start for a while before starting work. When starting the product, please pull the starter quickly and continuously without stopping, and do not pull too hard. Please note that this product cannot be used for piling in water.
You may also like
