Check the listing for details. 20Pcs 2.5mm 3/32" Small Diamond Drill Bits Masonry Tools for Glass Tiles Stone. Color: Silver, Condition: New. Listed at 13.49 USD. JINGLING 20Pcs 2.5mm 3/32" Diamond Coated Hole Saw Drill Bits For Glass Tile Ceramic Granite The 2.5mm diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite Product Name: Diamond tip drill bit, Glass hole saw bit, Glass drill bit Hole Diameter : 2.5mm (close to 3/32") Total length : 42mm (1-21/32") Drill depth: 3mm (1/8") The hole of drill bit is not right through the shaft, hole depth approximately 3 mm Shank diameter: 2.5mm ( close to 3/32") Quantity: 20 Pcs Drilling speed: Drill a hole in seconds Use with water as a lubricant Quick Tips 1. Please add water for coolant and drill slowly 2. Start drill at 45 Degree to surface and align to 90 Degree as hole forms 3. Never use drills while machine is in hammer action 4. Holes Require No Futher Work As Cutting Is Clean The Diamond Hole Saw Does NOT Have Center Pilot Drill There is no need for a Pilot Drill Bit, because pilots are not safe for glass/stone. How to use a hand drill to drill holes in the glass/tile/stone? Step 1. The bit on the glass/tile/stone 45 degree, open a half-moon notch on it Step 2. Slowly up the bit to 60 degrees, and then gently drill Step 3. Reached 90 degrees, continue to drill Step 4. Drill through the glass/tile/stone finally, the technique requires a "wobble" of the drill rather that steady pressure straight on We Can List Any Size & Amount Of This Product: Hole diameter from 1mm to 230mm We will send out your order within 1-2 days after payment has been received and cleared. Please let us know if you are looking for other accessories or hardware.