Check the listing for details. [3DMakerWorld] taulman3D T-Glase PET Co-Polymer Filament - 1lb. Condition: New. Listed at 19.99 USD. Key FeaturesPolymer made for direct food contact/containers.High Strength - Created for taulman3D's trusted industrial line to be stronger than ABS.Very low shrinkage - Printing on large flat surfaces is a breeze.Glass-like Clarity - With optical coatings, t-glase can appear as clear as a glass part. Taulman3D t-glase (Tough Glass) is a "water clear" PET Co-Polymer filament which offers a high degree of translucence and super low shrink properties plus very strong parts. Every single roll of t-glase is 100% made in the United States. It can be used in most desktop 3D printers at 235-245C. Easily prints on acrylic, glass, Kapton, or other large flat platforms -- even on printers that do not have a headed bed. The high gloss surface finish is great for jewelry, props, and electronics. This environmentally conscious filament is considered 100% reclaimable and can be converted back into usable line from recycled prints. Due to printing more slowly than standard beginner 3D printing filaments like ABS and PLA, t-glase is recommended for intermediate users. Item Specifics Filament Size: 1.75mm or 2.85mm Weight: 1lb