Check the listing for details. 5" Pressed Steel Rear Wheel for Rolling Chain Link Gates, Galvanized. Condition: New. Listed at 32.19 USD. 5" Pressed Steel Rear Wheel for Rolling Chain Link Gates, Galvanized Galvanized Steel Design for Years of Low Maintenance Use Rolls Smoothly Along a 1-5/8" Gate Rail Track Comes with Hardware Required to Attach to Rear Wheel Bracket Galvanized Pressed Steel Rear Wheels are designed for use on rolling chain link gates. The rear wheel rides along a 1-5/8" pipe track, carrying the rear load of the gate, while the front of the gate is supported by wheels that roll on the ground. Typically 2 rear wheels are required per gate, one on a top track and one on a bottom track, but large or heavy gates may require additional wheels to support their load. Specifications Steel Rear Wheel Track Rail Size (O.D) 1-5/8" Gate Frame Size (O.D.) 1-5/8" or 2" Depending on Rear Wheel Bracket (Sold Separately) Weight 3 lb Material Galvanized Steel Finish Silver Hardware Bolt & Nut for Attaching to Rear Wheel Bracket (Included) Typical Usage Residential, Commercial, Industrial Rolling Chain Link Gates Installation Insert the bolt of the Rear Wheel through the holes of the rear wheel bracket (sold separately), and tighten the included nut. Listing and template services provided by inkFrog