| Block Type | Step Block |
|---|
Check the listing for details. 54 Piece, 1/2-13, Combination Step Block and Clamp Set. Condition: New – Open box. Listed at 180.00 USD. Price Firm - 54 Piece, 1/2-13, Combination Step Block and Clamp Set, The missing pieces are 1 set of medium and 1 set of small step blocks. The step blocks are the heavy duty 2 inch thick blocks and will not fit in the holder. All the nuts, t-nut and studs were tested to finger tighten with very little of them showing any resistance. Much of the studs had surface rust, but were cleaned and all parts were given an oil bath. None of the rust was bad. The reason for the price is the 2 inch thick step blocks. They are expensive and if you need them, you know why.
You may also like
$35.68
Cast Iron V Block Set, 2 x 1 x 1-5/8, 3402-1000, Precision Machinist Tool
$45
Brown & Sharpe Machinist V Blocks, 750A
$40
Vintage Machinists V Block And Clamp
$130
Brown And Sharpe Tool Makers V Block With Clamps No 745 -HARDLY USED (NO BOX)
$59.99
Brown & Sharpe V Blocks and Clamp 599-749-1 2 Blocks 1 Clamp
$26.52
10 Pair1/8 x 4" Precision Parallel Set 0. 001" Hardened Steel In Case
$25.34
10 Pair 1/8x3 Precision Parallel Block Set Hardened Gage Gauge Tool Set .0002
$6.5
1/4 Degree Angle Block, 3" Overall Length, 0.0001 Accuracy
$39.99
Marked ES V-Block w/ Clamp Machinist Tool
$30.52
15pcs Aluminum Precision Setup Blocks Height Gauge Set for Router Woodworking
$22.99
1 Pair Of 3'' × 1-5/16'' × 2-3/8'' Jumbo V-Blocks Ground Cast Iron
$85
Enco Step Blocks Set of 20 Steel with Wood Case No Etchings NOS