Check the listing for details. Anti-Skate Blank Vinyl Calibration Record. Condition: New. Listed at 15.00 USD. Description Are you slowly destroying your valuable record collection because your anti-skate calibration is way off? Here's the solution: Use this blank record to calibrate your turntable anti-skate function. The goal is to have your tone arm/stylus stay stationary on the blank while the turntable is running and not drift forward or backward. To begin, peel off the protection film on this blank, put it on your turntable and turn it on. Place your arm approximately half way between the center hole and outside edge. If your tone arm drifts in either direction, remove the arm from the blank and slowly turn your anti-skate adjustment. Repeat procedure of putting tone arm in center of blank while the turntable is running. Adjust anti-skate until your tonearm remains in a stationary position. Produced by Ryan Williams at The Blank Tank Cover art by Max Mcnett ©2018 Lantern lathe llc Specs:• 12″ Record shrink-wrapped in a standard 12" jacket• 1.5mm/0.06″ inch thickness• Black Vinyl Record• Protective film on both sides