Check the listing for details. ASP Flying Model Rocket Kit Thermal Seeker 13 Streamer Duration ASP KTSS-13. Condition: New. Listed at 13.29 USD. ASP Flying Model Rocket Kit Thermal Seeker 13 Streamer Duration ASP KTSS-13This kit features a lightweight vac-form plastic cone, quality spiral-wound body tube, shock cord made of DuPont KEVLAR® & thin G10 fiberglass fins. Each of the Streamer Duration kits include our "Hang Time™" Tracing Paper Streamer Kits with enough materials to construct two streamers. The streamer size included with each kit is a good all - around size for the model size, but you may want to use a larger or smaller size depending on flying conditions. Be sure to check out other sizes of tracing paper streamers and the Silver Dura-Lar streamers for more options!Click here for an article that provides some tips on using our Tracing Paper streamers in competition models.Specifications:Length: 10.2"/25.9 cm Diameter: .541"/13.74 mm Approx. Weight (w/out recovery device): 0.25 oz/7 gm Recommended Engines: 1/4A3-3T; 1/2A3-2T; 1/2A3-4T; A3-4T Skill Level: Beginner/Intermediate Recovery Device: Streamer (4" X 40" Tracing Paper)What you'll need to build this rocket:Adhesives – thin viscosity cyanoacrylate ("CA") glue; hobby knife with a sharp #11 blade; sandpaper (medium - 220 or 280, fine - 320 or 400, & [optionally] extra fine - 500 or 600); pencil. Recommended, but not required: sanding block; extender tip for cyanoacrylate glue. Optional: accelerator for cyanoacrylate glue.What else you'll need to fly this rocket:Engines (see list above); Recovery Wadding; Electronic Launch System and Launch Pad