Check the listing for details. ATR Tile Leveling Alignment System 100 Cross Spacers Floors and Walls. Condition: New. Listed at 49.95 USD. ATR Tile Leveling Alignment System Cross Spacers - 100/Pack This system require spindle that not include in this listing visit our store for spindle or more option 2-piece system that virtually eliminates lippage tile installation.You only need 1 cross spacing plate for 4 tiles NOT 4 Clips like every other Leveling System While every other system require 360 units for 100 pieces of tile ATR require only 117 In stock - Ship Same Day Descriptions of available spacers at our eBay Store ATR2WX100 (Wall/Floor) • ATR Leveling System Cross Spacers 3/32 (2mm) 100 Spacers - Non Re-usableATR2WT100 (Wall/Floor) • ATR Leveling System T Shape Spacers 3/32 (2mm) 100 Spacers - Non Re-usable ATR2WE100 (Wall/Floor) • ATR Leveling System Edge Spacers 3/32 (2mm) 100 Spacers - Non Re-usable ATR3WX100 (Wall/Floor) • ATR Leveling System Cross Spacers 1/8" (3mm) 100 Spacers - Non Re-usableATR3WT100 (Wall/Floor) • ATR Leveling System T Shape Spacers 1/8" (3mm) 100 Spacers - Non Re-usable AT32WE100 (Wall/Floor) • ATR Leveling System Edge Spacers 1/8" (3mm) 100 Spacers - Non Re-usable Also available in variety of quantity Spacers, and SpindlesSome advantages below 1. The universal Spindle removes cleanly and easily, without any force applied, eliminating risk of fragmenting tiles or leaving any unwanted obstructions behind 2. Smaller package saving on shipping and storage space at the job site 3. ATR Leveling System is also the only system not to leave any straps or obstructions between the grout joints once the spindle is removed 4. NO SPECIAL TOOLS REQUIRED, for the advanced professional a simple socket and a cordless drill may be used to install and remove spindles so you are not depending on a broken gun or a single gun on the job site 5. ATR spacing plates lock the tile into position giving you the most perfect intersection of the tile and straight lines without requiring consistent adjustments 6. Great labor saving 4 to 1 ratio Very easy to learn and use at any skill level Accurate tile setting requires perfect leveling of the tiles. Often it is hard to properly set ungauged and thin tiles as well as larger format thicker tiles because of uneven floor foundations. As a result, tiles that seem perfectly level during the installation, after the thinset or adhesive cures, they often show a variance in height and can com promise the aesthetics. As an end result, you can quickly achieve a smooth level surface using the new ATR Leveling System Grout spacer 3/32" (2mm) Tile thickness: 15/64 - 51/64 (1/4 - 3/4) (6mm-20mm). Both the setting and removal of the leveling System are quick and easy. Advantages of the ATR Tile Levelers Creates a lippage free surfaceKeeps tiles in place while dryingAssists in aligning tilesStress free installationProfessional finishes every timeVery simple and easy to useSaves timeSuitable for floors and wallsSuitable for indoor and outdoor usesReusable spindleAustralian design and Australian made Example of the different between ATR to other leveling system 100 pieces of tile project ATR use total of 117 spacers with approximately cost of $95.00 compare to any other leveling system 360 spacers with cost of $166.00 About 33% saving in money of spacers and over 66% time saving in Labor of saving on installing additional 243 pieces Visit our store for more products https://stores.ebay.com/FlooringSupplyShopOur store open to the public / Buy here pick up at our store Mon - Fri 7:00 am - 5:00pm Sunday 8:00am - 12:00pmQuestions? Contact us at 877 880 8453 or email us 30 Days money back guaranteeVisit our store at https://stores.ebay.com/FlooringSupplyShop