Check the listing for details. Blue LED light kit 5' cable effects control 12V for props & scenery EEL1.5BK. Condition: New. Listed at 22.99 USD. Vivid blue LED lighting kit for props, theatrical scenery, Escape Rooms, and special effects lighting projects 12 volt DC battery operated flashing blinking strobing dimming functions – DC barrel connector interconnect This kit has; a blue LED light, with 5 foot cable socket assembly (EEL1-1.5M-SBL2-B), a Micro Effects Dimmer control with 8 different lighting modes (MED1), and a 12 volt battery holder (BHC1-8AA-12V). The blue LED lamp operates from 12 volts DC at 100ma nominal current, with a light output of 25 lumens nominal. The blue silicone Bi-Pin bulb uses 24 LEDs. The blue LEDs have a peak wavelength of 460nm. The EEL1-1.5M cable socket assembly can be press fit into a 7/16” hole drilled into rigid foam, wood or other prop and scenery building material. The taper of the socket body locks it into place, and the socket has a front flange to limit the insertion depth and provide a finished appearance. The kit operates from 8 AA batteries using the included battery holder. The light kit can be expected to operate more than 12 hours when using alkaline AA batteries. The MED1 Micro Effects Dimmer control button functions are: The Light button is used in static mode for dimming. Note the Static (0 mode) dimming function is between effects #6 and #1 when sequencing through the modes. The Speed (On/Off) button provides ten speed levels for the effects modes and is also used to turn the unit off when it is held longer than 3 seconds. The Mode button provides eight dynamic effects, and the Static (0 mode) between effects #6 and #1. Modes include strobe, flash, and blink effects. There is also a static dimming mode.