Check the listing for details. Bracket Puller & HS5157 Hydraulic Steering Cylinder Seal Kit Fit For Seastar. Condition: New. Listed at 62.92 USD. Bracket Puller & HS5157 Hydraulic Steering Cylinder Seal Kit Fit For Seastar 📌Application->> Bracket Puller fits for SeaStar and Uflex support brackets, including older style Tournament brackets. HS5157 kit fits front mount cylinder parts: HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755. 📌Steering Support Bracket Puller->> Helps safely remove support brackets and minimize damage to the steering bracket during removal process. 📌HS5157 Seal Kit with Pin Wrench->> Used to repair leaking or weeping cylinder seals. It is a nice replacement hydraulic seal kit fits for Seastar pivot / front mount hydraulic steering cylinders on outboard motors. This kit also fits most outboard boats with single or twin engines. 📌Superior Material->> The Bracket Puller is constructed of well-built and of high-quality forged steel with black oxide finish. The Seal Kits is made of high standard billet aluminum, both of them are able to resist rust and corrosion, ensures an unparalleled long lifespan. 📌100% Satisfaction Guarantee->> If you're not 100% satisfied with this tool set, simply return it for a full refund in 60 days. Premium Support & 12-Month Warranty. Steering Hydraulic Support Bracket Puller Application: Fit for (MOST) SeaStar and Uflex support brackets, older style SeaStar Tournament brackets included. Function: Helps safely remove SeaStar and Uflex support brackets and minimize damage to the steering bracket during removal process. Instruction: Take haft(half) of the bolt out and insert the puller into the bracket Screw the bolt to lock the bracket Use a driver or socket to tighten the bolt, pressing the bracket out Feature: Teeth design fit to grip the bracket. Applied with a 3/4" wrench or socket to fit the drive bolt. Front Mount Steering Cylinder Seal Kit: Application: Fit for SeaStar Pivot/Front Mount Cylinders; Fits parts: HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755 Cylinders. HS5157 kit contains: 1: 2PCS Seal Glands 2: Seal Gland Assembly Guide Tool 3: Pin Wrench 4、5、6、7: Various O-rings for the different cylinders Simple to Use: 1. Loosening the Seal Gland Place the pin wrench (supplied in the seal kit) in the holes of a gland, and use a 5/8-inch box wrench on the nut on the port end of the piston rod. Turn counterclockwise on the pin wrench with opposite pressure on the box wrench to loosen the seal gland. 2. Removing the Support Bracket Use a 3/4-inch socket wrench to remove the nut and washer securing the support bracket to the support rod. Do the same to the piston rod nut and washer. Use wrenches on the opposite ends to keep the rods from turning. With hardware gone, pull off the support bracket. 3. Removing the Old Seal Gland Finish unscrewing the old seal gland. If you can't grip it well with your hand, use the pin wrench. Slide it off the piston rod. 4. Installing the New Seal Gland Place the tapered guide tool from the kit on the end of the piston rod and lubricate it and the piston rod well with oil or grease. Carefully slide the new seal gland over the guide and onto the piston rod until it reaches the cylinder. Screw the seal gland into the cylinder, but don't tighten it yet. Remove the guide tool. (it is not part of the final assembly, but you will need it for the other side.) 5. Reinstalling the Support Bracket Reconnect the support bracket to the support rod and piston rod and replace the washers and nuts, tightening the nuts against the washers. You may need to use wrenches on the opposite nuts to tighten sufficiently. 6. Tightening the New Seal Gland Use the pin wrench to tighten the new seal gland while using a 5/8-inch box wrench on the end of the piston rod for counter torque. Package Includes: 1 x steering support bracket puller 2 x new seals/caps (one for each end of cylinder body) 1 x spanner wrench tool needed to remove seal caps 1 x seal gland assembly guide tool All necessary o-rings 1.Orders will be ship out within 1-3 business days after payment has cleared. Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours. 2.All of the items are shipped from our Warehouse in USA. 1. Any defective items received can be replaced or refunded. Please contact us with the item number, eBay ID and defect description within 60 days after the date of package arrived. No Claim will be accept after 60 days. 2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all NON-seller mistake returns for refund are subject to 20% re-stocking fee. If you have any questions, please feel free to email our service specialists 24 Hours a Day, 7 Days a Week, and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us. About Feedback: Please contact us before leaving Neutral or Negative feedback if you are not satisfied our service or products. Good communication is helpful for both of us to resolve any problems and issues. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers. We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. If possible,please leave us a positive feedback and 5 star DSR when you receive the item in satisfactory condition. Your kind support will be highly appreciated by us and keep us moving forward! On May-25-22 at 21:57:38 PDT, seller added the following information:On May-26-22 at 02:23:23 PDT, seller added the following information:On May-26-22 at 07:05:41 PDT, seller added the following information:On May-26-22 at 12:13:22 PDT, seller added the following information:On May-26-22 at 17:09:18 PDT, seller added the following information: