Check the listing for details. Clear-Com FSII-BASE-II-5 FreeSpeak II Digital Wireless Intercom Base Station. Condition: New. Listed at 8225.00 USD. The FSII-BASE-II-5 is a base station from Clear-Com that's designed for use with the wireless FreeSpeak II 1.9 GHz active transceiver antennas and supports five belt packs. It comes equipped with four 2-wire connections for analog partyline connection, four 4-wire audio connections and four displays with soft keys. Additionally, a dedicated stage announce (SA) output and program audio input are provided.FeaturesRouting and configuration of up to 5 FSII belt packsBrowser-based configuration toolFour 2-wire ports with call signal, auto-nullingFour 4-wire ports with call signalMatrix and party line configurations support up to 12 channels and/or groupsSpecificationsGeneral/Technical:Base-to-Beltpack Frequency Response: 100 Hz – 7.1 kHzNo. of Beltpacks per Base Station: 5No. of Transceiver/ Antennas Supported by Base: 10No. of Active Transceiver Ports: 2, one port can remotely power up to 1 FSII splitter or 1 FSII transceiverPC Programming Port: 2 LAN RJ45Relay Port: DB15, supports one relay assigned to the SA outPartyline A , B, C, D (each): XLR-3F, on/off termination switch, Clear-Com and RTS compatiblePartyline Power On/Off: A/B, C/D pairedPartyline Output Voltage: 26 – 28 VDC, 800 mA per pair (A/B or C/D)Four-Wire/Matrix Connection: 4 RJ-45Program Input: XLR-3F, transformer isolated, line-level inputStage Announce Output: XLR-3M, transformer isolated, line-level outputFront Panel Headset: 4-pin male and 5-pin female optionsFront Panel Displays: 4 OLED’s with encoders and assignable soft keysFront Panel Indicators: Antenna Status, Beltpack StatusExternal Power Supply Connection: 12 VDCBase Station Programming/Editing: Push-to-enter rotary encoderPower:Input: 100-240 VAC, 1.4 A maxOutput: 12 VDC. 60 W, 5 ACurrent Draw: 12 V, 4 A max, 48 W maxPhysical:Dimensions (H x W x D): 1.75" x 19.0" x 10.2" (44 x 483 x 259mm)Weight: 5.57 lbs. (2.5 kg)