| Shank Diameter | 3/8" |
|---|---|
| Overall Length | 2-1/2" |
| Brand | CLEVELAND |
| MPN | C42691 |
| California Prop 65 Warning | N |
| Country of Origin | US |
| NumberOfItems | 1 |
| Restricted States | [] |
| Style | Square End Mill |
| Grade | General Purpose |
| Item | Square End Mill |
| Type | Square End Mill |
| Application | For Periferal Cuts on Cobalt, Nickel, Austenitic Alloys, High Ten |
| List Number | HGC-4C |
| Number Of Flutes | 4 |
| Overall Length (In.) | 2-1/2 |
| Shank Dia. | 3/8" |
| Weight | 0.0700 |
| Length | 0.500 |
| Width | 0.500 |
| Depth | 0.500 |
| Dia. (In.) | 5/16 |
| Diameter | 5/16" |
| Cutting Direction | Right Hand |
| Dimension Type | Fractional Inch |
| Shank Dia. (In.) | 3/8 |
| Features | Square End Mill, 0.3125 in Milling Dia., Cobalt, Uncoated, Non-Co |
| Cut | Right Hand |
| Battery Included | No |
| End | Single |
| End Mill Application | Finishing |
| End Mill Cutting Type | Center |
| End Mill Material | Cobalt |
| End Mill Style | Square |
| Helix Angle | 30 Degrees |
| Length Of Cut | 3/4" |
| Milling Dia. | 5/16" |
| Single End/Double End | Single End |
| Corner Radius | 0 |
| UPC | 697334426912 |
Check the listing for details. Cleveland C42691 4-Flute Cobalt 8% Square Single End Multi-Flute Centercut Ctd. Width: 0.500, Condition: New, Made in US. Listed at 19.99 USD. Square End Mill, 0.3125 in Milling Dia., Cobalt, Uncoated, Non-Coolant Through, Weldon Flat, Length of Cut 0.75 in, Overall Length 2 1/2 in, Shank Dia. 3/8 in, Neck Dia. Not Applicable. Square End Mill.
You may also like
$31.1
Value Collection 7/8" Diam, 1-7/8" LOC, 4 Flute High Speed Steel Ball End Mill
$270
1-1/2" Roughing End Mill, High Helix, Cobalt, 3-Flute, 4" LOC, 1-1/4" Shank
$29.21
Accupro 3/16" Diam, 1-1/8" LOC, 2 Flute Solid Carbide Ball End Mill Uncoated,...
$89.43
Value Collection 1", 1-7/8" LOC, 5/8" Shank Diam, 4" OAL, 4 Flute, Cobalt Squ...
$34.61
Accupro 1/4" Diam, 1-1/8" LOC, 2 Flute Solid Carbide Ball End Mill Uncoated, ...
$109.31
Kennametal 4169811 Square End Mill: 1/2" Dia, 5/8" LOC, 2-5/32" OAL, 4 Flutes
$60.88
Accupro 12179686 Carbide Corner Radius End Mill: 1/2" Diam, 5/8" LOC
$14.73
3/32" Solid Carbide 2 Flute END MILL Regular Length Made In USA Morse 5944
$60
1-1/4" CARBIDE END MILL Chamfered CLAPPDICO RD2277 2757329 14612-3 C20
$36.92
Value Collection 5/16" Diam, Coarse Pitch, 3/4" LOC, 3 Flute Cobalt Roughing ...
$178.55
Niagara 3116006 SCS738R Carbide Corner Radius End Mill: 2" LOC, 7 Flutes
$146.04
SGS 38583 Carbide Corner Radius End Mill: 1/2" LOC, 5 Flutes, 1/2" Diam