| Brand | CLEVELAND |
|---|---|
| MPN | C42694 |
| California Prop 65 Warning | N |
| Country of Origin | US |
| Type | Cutting Tools > End Mills > Cobalt End Mills |
| Weight | 0.0800 |
| Length | 0.500 |
| Width | 0.500 |
| Depth | 0.500 |
| Features | Square End Mill, 0.375 in Milling Dia., Cobalt, Uncoated, Non-Coo |
| Battery Included | No |
| UPC | 697334426943 |
Check the listing for details. Cleveland C42694 4-Flute Cobalt 8% Square Single End Multi-Flute Centercut Ctd. Width: 0.500, Condition: New, Made in US. Listed at 22.59 USD. Square End Mill, 0.375 in Milling Dia., Cobalt, Uncoated, Non-Coolant Through, Weldon Flat, Length of Cut 0.75 in, Overall Length 2 1/2 in, Shank Dia. 3/8 in, Neck Dia. Not Applicable. General Purpose.
You may also like
$399
Lot of 10 (Ten), 5/8" Roughing End Mills, OSG, Carbide, 4 Flute, 20151111, New
$24.9
YG-1 Minicut 0820-2016 5/8" Diameter 5/8 Shank 3 Flute HSS Roughing End Mill New
$26.5
NEW! KYOCERA 2FL 1/2” 22A3-500-2-90DEG Solid Carbide Drill _#MULTIPLE IN STOCK!
$27.42
Hertel 1/2", 1" LOC, 1/2" Shank, 3-1/4" OAL, 2 Flute, HSS Square End Mill Sin...
$14.71
5/16" (.3125") 4 Flute Cobalt NCC Long Roughing End Mill MF40902242
$19.95
2 New 6mm x 30mm LOC x 100mm OAL Carbide AlTiN Coated 4 Flute Square End Mills
$31.81
Accupro 5/16", 1-1/8" LOC, 5/16" Shank, 3" OAL, 2 Flute, Solid Carbide Square...
$279.95
IMCO POW-R-FEED 3/4" 6 Flute Carbide Endmill 3/4" Shank .060"R 9176045 (LOC1228D
$37.9
62-725 Onsrud 1/4" Carbide Downcut Router 1 Flute .250" Diameter .750" Flute
$18.61
5/16" (.3125") 4-Flute Cobalt NCC Roughing End Mill Shank 3/8" MF40902245
$16.92
2-Flute Ball Nose Router Bit 1mm Radius 4mm Shank Carbide AlTiSin Coated 50mm
$11.54
Dovetail Router Bits 7/8" Diameter 1/4" Shank 14 Degree Dovetail Joint Bit