| Restocking Fee | No |
|---|---|
| Return shipping will be paid by | Buyer |
| All returns accepted | Returns Accepted |
| Item must be returned within | 60 Days |
| Refund will be given as | Money Back |
| Brand | MART |
| Wattage | 4000W (250V AC), 384W (24V DC) |
| Recommended Environment | Interior/Outdoor |
| Power Source | Solar |
| Color | Gray |
| Rated Current | 16A |
| Model | CS-01-3 |
| Current Type | AC/DC |
| Performance | Greater than 2000W |
| Resistance Properties | Dustproof |
| Features | Daylight Operation |
| System Configuration | Network Coupling |
| EAN | 5904730567473 |
| Particle Board Nung | 250VAC, 24VDC |
| Connection Type | DIN Rail |
| MPN | CS-01-3 |
| Application | power storage |
| Country/Region of Manufacture | Poland |
| Type | PV optimizer |
Check the listing for details. Control Unit for Pv-Anlagen CS-01-3 Pv-Optimierer 250V AC, 24V Dc. Color: Gray, Condition: New. Listed at 92.39 USD. Control Unit for Pv-Anlagen CS-01-3 Pv-Optimierer 250V AC, 24V DcThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. PHOTOVOLTAIC SYSTEM CONTROLLER CS-01-3 WITH HERMETIC PROBE IN ENCLOSURE (IP65) PHOTOVOLTAIC SYSTEM CONTROLLER CS-01-3 is designed to switch on the receiver automatically when the solar radiation intensity exceeds the set threshold (ON) and turns it off when the lighting intensity falls below the set threshold (OFF) or vice versa (changeover contact: normally open, normally closed). Two independent rotary knobs for setting the switch-on and switch-off thresholds enable optimal control. The setting of the switch-on threshold has a logarithmic progression in the range of 3...100 klx. The switch-off threshold setting is linear in the range of 20…100% of the switch-on threshold. The CS-01-3 allows receivers (heating water, etc.) to be switched on in the event of excess energy produced by the photovoltaic system. The system includes: CONTROL UNIT CS-01 – in a non-flammable case (ABS V0), EXTERNAL SENSOR - in non-combustible case (ABS), EXTERNAL SENSOR is in a box (IP65) with a screw connection. Mounts to a wall or other vertical surface with two screws (included). The length of the cables connecting the CS-01 CONTROLLER to the sensor can be up to 1000 m (for cables with a cross-section of 2 x 0.5 mm). ADVANTAGES OF THE CS-01-3 PHOTOVOLTAIC SYSTEM CONTROLLER: high switching capacity 16A (4000W) 250V AC, 16A (384W) 24V DC, high starting current (surge current resistance 100A), Executing relay contacts (one normally open - NO, one normally closed - NC) galvanically isolated to allow connections in different configurations,Attitude: Switch ON ON (logarithmic) – 3…100 klx OFF (linear)Switch off OFF 20…100% of the set switching threshold Signaling (LED) on the front panel of the CONTROL UNIT CS-01 informs about the operating status: green LED to indicate the 230 V supply voltage at the LN terminals, red LED flashes to signal (without delay) that the set (adjustable) lighting threshold has been exceeded, blue LED for signaling switching - switching on (contact 1-2), disconnecting (contact 2-3), mounting on a 35mm rail - an 18mm module.PHOTOVOLTAIC SYSTEM CONTROLLER CS-01-3 WITH HERMETIC PROBE IN ENCLOSURE (IP65) PHOTOVOLTAIC SYSTEM CONTROLLER CS-01-3 is designed to switch on the receiver automatically when the solar radiation intensity exceeds the set threshold (ON) and turns it off when the lighting intensity falls below the set threshold (OFF) or vice versa (changeover contact: normally open, normally closed). The CS-01-3 allows receivers (heating water, etc.) to be switched on in the event of excess energy produced by the photovoltaic system. Mounts to a wall or other vertical surface with two screws (included). The length of the cables connecting the CS-01 CONTROLLER to the sensor can be up to 1000 m (for cables with a cross-section of 2 x 0.5 mm). Executing relay contacts (one normally open - NO, one normally c Marke MART Wattleistung 4000W (250V AC), 384W (24V DC) Empfohlene Umgebung Innen/Außen Stromquelle Solar Farbe Grau Nennstrom 16A Modell CS-01-3 Stromart AC/DC Leistung Größer als 2000 W Beständigkeitseigenschaften Feuchtigkeitsbeständig Beständigkeitseigenschaften Hitzebeständig Beständigkeitseigenschaften Korrosionsbeständig Beständigkeitseigenschaften Rostbeständig Beständigkeitseigenschaften Staubdicht Beständigkeitseigenschaften Stoßfest Beständigkeitseigenschaften Wasserdicht Beständigkeitseigenschaften Wetterfest Beständigkeitseigenschaften Witterungsbeständig Besonderheiten Tageslichtbedingungen Besonderheiten Tageslichtbetrieb Besonderheiten Wartungsfrei Systemkonfiguration Netzkopplung EAN 5904730567473 Spannung 250V AC, 24V DC Anschlussart DIN-Schiene Herstellernummer CS-01-3 Anwendung Automobil Anwendung Bewässerung Anwendung Elektronik Anwendung Gewerblich Anwendung Heim/Garten Anwendung Kommunal Anwendung Schuppen Anwendung Stromspeicher Herstellungsland und -region Polen Produktart PV-Optimierer