Check the listing for details. Digital LCR Meter Capacitance Resistance Impedance Inductance Measurement Tester. Color: White, Condition: New. Listed at 464.96 USD. Digital LCR Meter Capacitance Resistance Impedance Inductance Measurement TesterNote: Battery /Liquid/Powder not Included During The Shipping !!! Introduction: ET45 series LCR digital bridge is a component parameter analyzer based on the principle of automatic balancing bridge. Its 10Hz-100kHz test bandwidth, frequency continuous adjustable, 0.2% basic measurement accuracy and the file classification function provided by the instrument provide accurate and complete measurement and analysis for most components and materials, which are widely suitable. Used in product development, component inspection, product on-line inspection and other applications. Features: ¤ The highest measuring frequency is 100kHz, and the stepping; frequency is continuously adjustable at 1Hz ¤ Test level 10~2000 mV, 1 mV step continuously adjustable ¤ Supporting DC Resistance (DCR) and Electrolytic Capacitance Measurement ¤ Internal bias voltage output 0mV~1500mV ¤ 3.5-inch TFT display, 5-bit display ¤ Data recording function (maximum, minimum, average) ¤ Supporting SCPI Communication Protocol ¤ Provide system settings to configure Chinese or English, buzzer, screen brightness, etc ¤ The basic measurement accuracy is 0.1% ¤ Manual and automatic range ¤ With open circuit and short circuit calibration function ¤ Comparator sorting (5 gears), alarm function Specifications: Model ET4502 Testing frequency 10-10KHz continuous adjustable, 1Hz step[1]by-step Display screen Display screen 3.5 inch TFT LCD Number of display digits Principal parameter: 5 digit，Secondary parameter: 5 digit Measured parameter Principal parameter: L/C/R/Z，Secondary parameter: X/D/Q/θ/ESR Measurement Range L：0.001μH～9999H C：0.001pF～99.999mF R：0.0001Ω～99.99MΩ Basic accuracy 0.1% Measuring display speed 2 time/s (slow), 4 times/s (medium), 8 time/s (fast) Internal bias 0-1500mV adjustable, at a step of 1mV. Testing level 0.01~2V adjustable, at a step of 1mV. Signal source output impedance 30Ω、100Ω Calibration function Open circuit calibration, short circuit calibration Screening function The limit range of screening can be set to -50%～＋50%, and the fixed points are 1%, 5%, 10% and 20%. Comparator 5 groups sorting,3 groups of qualified setting, one group of unqualified setting, one group of auxiliary setting Interfaces standard: RS232（or 485）, USB Device, Handler ; Others Support dc resistance (DCR), electrolytic capacitor measurement model, Adjustment of backlight brightness, Chinese and English are optional General technical specifications: ¤ Power supply voltage: 220V.AC±10%, or 110V.AC±10%, 45~65Hz ¤ Power consumption: