Check the listing for details. E444X Polyaspartic High Gloss Concrete Floor Coating | 84% High Solids | Non-.... Condition: New. Listed at 74.75 USD. E444X Polyaspartic High Gloss Concrete Floor Coating | 84% High Solids | Non-Yellowing | Low Odor E444X Polyaspartic Coating 84% High Solids | Non-Yellowing | Low Odor E444X Polyaspartic is a two component, 84% high solids, high gloss solvent, low odor high performance polyaspartic. E444X is aliphatic (non-yellowing) designed as an extremely tough, durable decorative topcoat with excellent adhesion to protect high performance epoxy floor concrete coating systems. E444X offers excellent abrasion and chemical resistance, is UV Stable, and has a beautiful, extremely clear, high gloss appearance available in 13 colors. With a 15-20 minute working time E444X can be recoated in 6-9 hours and take light foot traffic within 24 hours. E444X is sold in 32 oz quart, 2 gallon and 10 gallon kits. It comes in clear or can be tinted with one of 13 colors ( Pigment Sold Separately ). The spread rate of the E444X ranges from 133-320 square feet per gallon (5-12 mils dry film thickness) depending on project requirements. The E444X can also be applied as a clear or colored topcoat over an epoxy system AND direct to properly prepared concrete as a basecoat coating. PRIMER: Recommended as topcoat to high performance epoxy systems including E707HB Epoxy , however can be applied direct to concrete. TOPCOAT: None recommended. Can apply multiple coats of E444X. Where is E444X Fast Cure Polyaspartic used? Concrete floors Garage Floors Basement Floors Warehouse and commercial office floors Kitchens Outdoor Applications Why E444X Polyaspartic? Tough, durable topcoat for epoxy floor coatings Indoor and Outdoor Application Can be Applied Direct to Concrete High solids 84% Easy to work with 1:1 mix ratio Can be applied up 12 mils thick one coat (133 sq'/gallon) Excellent chemical and abrasion resistance UV Stable and will not yellow Mild Solvent Odor (compared to similar coatings) Beautiful high gloss appearance Designed for high traffic and industrial areas Available in clear & 13 colors (Colored Pigment Sold Separately) Beautiful Color Line To Enhance Your Flooring Projects. Our Polyaspartic Pigment Is Sold In 8 Oz and 16 oz sizes. Easy To Use, Just Pour And Blend. Add 5-6 Oz Per Mixed Gallon Of Liquid, Depending On Desired Color when the E444X is used as basecoat in full flake system and 8 oz per gallon when used as a basecoat in a solid color or less than full flake system. SPECIFICATIONS Solids By Weight 84% By Volume 83% VOC