Check the listing for details. ED&D/Educated Design & Development LT-601 Digital Leakage Current Tester. Condition: Used. Listed at 1296.75 USD. ED&D/Educated Design & Development LT-601 Digital Leakage Current Tester Comes with what you see in the pictures. If you don't see it, you probably won't get it. Specifications are from ED&D and may vary slightly due to upgrades, options, or revisions this unit may or may not have. This unit ships fully tested and guaranteed to work for 30-days, parts and labor, excluding freight. The Unit's Serial Number Tag Reads: Model Number: LT-601 Serial Number: G07300143 Power Requirements: 100-120/200-240 VAC, 15 A, 50-60 Hz Features: The LT-601 meets UL, CSA, CE, EN, IEC, MIL standards... These devices also meet standards for medical product safety testing! Measures leakage current through product's power cord ground conductor Measures leakage current through surface/patient-to-ground Measures leakage current patient-to-patient Description: The LT-601 leakage current tester is a state-of-the-art test instrument designed to measure leakage current in accordance with the International Standard for Medical Electrical Equipment, IEC601-1, Second Edition. The LT-601 is designed to make leakage current testing easy. Gone i the jumble of wires necessary to simulate the prescribed test conditions. No more searching for an adequate meter to use. No more worries about calibration or correlation with the testing agencies. The LT-601 transforms what was once a one-hour procedure into a quick and simple test. Features that make it easy to use include: Built-in 3-1/2 digit LCD meter that measures the true RMS value of leakage current. True RMS is especially important in produces where the leakage current is non-sinusoidal as is possible with switch-mode power supplies and products that use them. The LT-601 is designed to test any single-phase product rated 100-120 or 200-240 Volts that requires 15 Amps or less current. True 15 Amp open neutral, open ground, and line polarity (forward/reverse) test conditions. 120 V front panel receptacle provides quick access for testing 120 V products. The rear panel receptacle allows easy connection to any product rated 100-120 V or 200-240 V at up to 15 Amps, with any plug configuration, using the appropriate adapter cord-set (not included). Front panel access to the internal meter circuit to measure leakage from surface-to-surface or surface-to-ground as required by IEC-601. Rear panel jacks provide access to the Body Circuit impedance to observe the wave shape of the leakage current or to connect a second meter. The ability to measure the leakage current of a product through the ground wire of the product's power cord. Specifications: Input Ratings: 100-120/200-240 VAC, 15 A, 50-60 Hz Testing Tolerance: 90-132 / 180-264 VAC Output Ratings: Same as input ratings Display: 3.5" digital LCD display Dimensions: 13.25" W x 11.5" D x 5.5" H Weight: 9 lbs. Measurement Ranges: 200 µA Range: Resolution: 1.0 µA Accuracy: ±1% full scale 2000 µA Range: Resolution: 10.0 µA Accuracy: ±1% full scale Body Impedance Circuits: Network in accordance with IEC 60601, EN 60601, CSA 601, UL 2601 Standards met for Testing: IEC 60601, UL 1703 (Standards are including but not limited to) For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a $10.00 minimum for packaging, handling, and order processing. International shipping to be determined by destination. Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.: (1) Are you the end-user of this item? (2) If you are not the ultimate end-user of the item, please state the ultimate end user's name. (3) What is the ultimate country destination? 10/31/23