Check the listing for details. FanPico-0401D - Programmable PWM (PC) Fan Controller [DIY Kit]. Condition: New. Listed at 15.95 USD. This is a DIY kit for building FanPico Fan Controller (see github.com/tjko/fanpico/).Kit includes a PCB with SMT components pre-assembled and thru-hole components that require assembly (soldering). NOTE! This is NOT a finished product, assembly is required. There is two board variations currently:- 0401D - 4 x Fan Outputs and 1 x (Motherboard) Fan Input- 0804D - 8 x Fan Outputs and 1 x (Motherboard) Fan Input - see: https://www.ebay.com/itm/285011546392/ Kit contents: Standard Kit: - FanPico PCB with SMD components pre-assembled - Fan Connectors (either straight or right-angle versions) - Temperature Sensor Connectors (either straight or right-angle versions) - Power Connector (PC "Floppy" power connector) - DC power connector - Pin headers for the jumpers and TTL Serial port - Jumpers for the jumper pin headers - Reset switch Deluxe Kit: - Includes everything in the Standard kit - Female headers for mounting Pico (or Pico W) with headers soldered on (instead of soldering Pico directly onto the PCB). - Female header for OLED connector - Straight and Right Angle pin headers for OLED connector (for using cable to relocate OLED display) - Raspberry Pi Pico W module - OLED module (128x64 pixels)