Check the listing for details. Fiber Optic Assembly Multimode & Single Mode Connectors Epoxy Kit F112, 2.5 gm. Condition: New. Listed at 14.99 USD. Technical Product BulletinFIBER OPTIC ASSEMBLY EPOXY ADHESIVE PRODUCT DESCRIPTION:AA-BOND F112 is an impact resistant, fiber-optic adhesive. AA-BOND F112 is two-part, low viscosity epoxy has the distinct advantage of remaining below 3000 cps for a minimum of 40 minutes. AA-BOND F112 allows more connectors to be produced from one mix. Low stress, AA-BOND F112 is an excellent choice formultimode connectors and single mode connectors where excessive curing temperatures may cause cracking. AA-BOND F112 can be cured at room temperature overnight or as fast as 15 minutes at 90°C. The blue color facilitates easypolishing and its cured properties prevent pistoning. This product is a 100% solid system that can be used for small potting and sealing applications where resistance to thermalshock and impact are required. THERMAL PROPERTIES:CTE, linear34.4 µin/in-°FGlass Transition Temp, Tg216 °F Operating Temperature-60 to 100 °C PRODUCT CHARACTERISTICS:AppearanceDark BlueComponents2 component - requires mixing Mix Ratio, by weight 100/30 Resin:HardenerBenefits· Low viscosity· Thermal shock and impact resistant· Low stress connections Cure TypeRoom Temperature or Heat Cure Typical Applications· Fiber optic assembly· Multimode and single mode connectors · Small potting· Sealing applications CURE SCHEDULE:24 hours@ 25°C1 hour@ 65°C15 minutes@ 90°C CURED PROPERTIES:Glass Transition Temperature(Tg), ultimate, °C102Refractive Index1.51Water Absorption %0.07 UNCURED PROPERTIES:Viscosity @ 25 °C, cps1800@ 25 °C, 77 °F Thixotropic Index1.0Specific Gravity, cured1.2Pot Life30 minutes MECHANICAL PROPERTIES:Hardness, Shore D85Adhesive Bond Strength (Lap shear, alum to alum)2500 psi 24 hrs @ 25°C3000 psi 1 hr @ 65°C4300 psi 15 min @ 90°C GENERAL INFORMATION:For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). HOW TO USE:1- Carefully clean and dry all surfaces to be bonded. 2- Apply this completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured. 3- Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use. 4- Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should bere-dissolved prior to use for best results. AVAILABILITY:. This epoxy can be supplied in many different packages. Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application