Check the listing for details. Hard Disk Cooler & stop HDD Vibration. Condition: Brand New. Listed at 16.77 USD. Hard Disk Cooler & stop HDD Vibration. NEXUS The Nexus DiskTwin is an ideal solution to get rid of any hard disk drive vibration noise and resonance. Are you tired of all the hard disk seek and vibration noises? Or is your hard disk creating resonance in your case? The Nexus DiskTwin will end that suffering! Stop vibration Maximize cooling Fits 3.5" hard disk drive The Nexus DiskTwin is equipped with high quality rubber absorption blocks. These solid rubber blocks absorb shocks and prevent resonance. Solid aluminum is used to create the heat sink elements of the DiskTwin. On the side of the DiskTwin where it is touching the side of the hard disk drive, there is a thermal pad fixed to transfer the hard disk drive heat more efficient to the aluminum. The DiskTwin fits onto all 3.5" hard disk drives. And a hard disk drive fitted with the DiskTwin fits into a 5.25" drive bay. Installation instructions: 1 Clean the two sides of the hard disk drive and remove any dust and oil from the surface 2 Mount the DiskTwin onto the hard disk drive sides by using the supplied (14 mm/0.55 inch) screws, Push the screws through the rubber block into the mounting holes of the hard disk and tighten the screws gently. 3 Mount the hard disk drive with DiskTwin into a 5.25" drive bay in your system using the supplied (7,5 mm/0.3 inch) screws. 4 (Re-)fix the connectors to your hard disk drive.