| Brand | HARVEY TOOL |
|---|---|
| End Type | Stub |
| Unit Type | Unit |
| Overall Length | 2 in |
| Material | Solid Carbide |
| MPN | 937930 |
| Unit Quantity | 1 |
| Shank Diameter | 3/16 in |
| Mill Diameter | 3/16 in |
Check the listing for details. HARVEY .187 D x .030 R STUB CRAD EM 4 FL. Condition: New. Listed at 20.03 USD. .187 D x. 030 R STUB CRAD EM 4 FL. Shank Dia. = 0.1875" (0.1870") (4.763 mm ) (4.750 mm ) (3/16 ). End/Corner Shape = Corner Radius. Corner Radius = 0.0300.
You may also like
$38.12
Hertel 3/8" Diam, Fine Pitch, 3/4" LOC, 4 Flute Cobalt Roughing Square End Mi...
$38.8
Haas 4mm Carbide End Mill, 4 Flute, Hybrid AlCrN Coated 0.3mm Radius, HSPM2
$39.95
Controx Cobalt 7/8 2Fl Double End 45deg EM #232167
$58.3
Accupro 0.02", 0.16" LOC, 1/8" Shank, 2-1/2" OAL, 3 Flute, Solid Carbide Squa...
$160
LOT OF (2) Melin Tool 1-1/4" DIA X 2" LOC X 4-1/2" OAL 6F TiCN
$60
LOT OF 2 NOB Niagara Cutter - CM490-0.375-D1-C.0-Z4 17004753 Carbide Mill
$143.95
Haas 16mm Carbide End Mill, 4 Flute, Hybrid AlCrN Coated 0.4mm Chamfer, HSPM2
$56.46
Accupro 1/2", 1" LOC, 1/2" Shank, 3" OAL, 3 Flute, Solid Carbide Square End M...
$204.77
18mm x 18mm 4FL Carbide End Mill, OSG 404-7087
$192.59
Hertel 1" Diam, Fine Pitch, 4" LOC, 5 Flute Cobalt Roughing Square End Mill T...
$169.53
2" DIA 6 FLUTE HSS FINISHING END MILL, 5-3/4" OAL, COMBO SHANK - CLOSEOUT!
$12.89
Quinco Tool 4 Flutes 1" Diameter H.S End Mill