Check the listing for details. iDATALINK HRN-SW-HD1 new stereo and retain handlebar-mounted controls Harley-D. Condition: New. Listed at 16.95 USD. iDatalink's HRN-SW-HD1 wiring adapter works in conjunction with iDatalink's Maestro ADS-MSW module (sold separately), allowing you to connect a new radio in select 1996-2013 Harley-Davidsons. Once connected, you'll retain the use of your handlebar-mounted audio controls in these vehicles, including the Push-to-Talk and Squelch buttons (if present). The adapter plugs right into the ADS-MSW module, which then plugs into the steering wheel control input or wired remote input on your new radio. You'll need to splice the bare-end wires on this iDatalink harness to the wires on the harness that plugs into your new radio. Taking full advantage of the harness and moduleOnce you've installed the adapter and module you'll be able to program short- and long-hold audio functions to each handlebar button. And since the harness works with any stereo with a wired remote, your options are endless. Installation note: The HRN-SW-HD1 adapter must be used with the iDatalink Maestro ADS-MSW module to connect a new stereo to your Harley-Davidson vehicle. allows installation of new stereo in select Harley-Davidson motorcycles (also requires the Maestro ADS-MSW module)retains the use of your handlebar audio controlsadds ability to program short- and long-hold functions to each audio buttonMFR # HRN-SW-HD1What's in the box:iDatalink HRN-SW-HD1 Factory Integration Adapter owner's manual Harley Davidson T-harness