Check the listing for details. IES 8405 INTER-MIX 10 BARE METAL SEAM SEALER NON-SAG. Condition: New. Listed at 41.99 USD. INTER-MIX 10 “Thick-Set” Adhesive/Seam Sealer Is a non sagging, firm, semi-flexible, adhesive/sealant designed for sealing vertical and horizontal seams and joints on automobiles and truck applications. May be applied to bare metal and primed sheet metal joints.Excellent adhesion to: bare metal Primed metal, SMC, FRP, Fiberglass, Aluminum Most plastics. Can be sprayed with our 2K Spray System. • Can Be Applied to Bare Metal! • Can Be Feather-Edged. • Corrosion Protection. DIRECTIONS 1. Surface must be clean and free of dirt, grease, oil, rust, old seam sealer and any other contaminants. 2. Apply directly to bare metal, epoxy or urethane primed surface. 3. Follow the IES dual cartridge set up instructions for loading cartridge into the dispensing gun. 4. Dispense IES Bare Metal Seam Sealer into the joint or seam. Smooth out if desired with tool, finger or brush. 5. IES Bare Metal Seam Sealer will set up in approximately 10 minutes. 6. Scuff or sand sealer with 320 grit sandpaper prior to priming or painting. 7. Prime and paint per manufacturer’s specifications. PROPERTIES Mixed Color Various Mix Ratio 1:1 Work Time 10-15 Minutes Handling Time 20-30 Minutes Part Paint-ability Immediately Sealer Sand-ability 45 Minutes Full Cure Strength 6-8 Hours 1500 Hour Salt Fog Test Passed (ASTM-B117)