Check the listing for details. IK Goizper IK INOX/SST 10. Condition: New. Listed at 235.50 USD. The IK INOX 10 professional sprayer #83374 is characterized by its great robustness, ease of use and quality of materials. The equipment is equipped with a 1.8 m bi-component hose, a large integrated funnel to facilitate filling, a safety valve set at 6 bar that can be depressurised, a support for the lance, a pressure gauge, a compressed air connector, a belt to carry it on a shoulder strap, two spray nozzles (adjustable cone and fan) and a base for greater stability and foot support. The tank of the IK INOX 10 is made of stainless steel. IK INOX/SST 10 has been created for use with vegetable and animal oils, low-viscosity release oils, neutral (non-chlorinated) cleaning agents, hydrocarbon-based solvents, lubricants and petroleum products. For use in: Building Cleaning and disinfection Industry and maintenance Pest control For use with: Solvent-based pesticides Oils solvents petroleum by-products Technical information Valve Tared at 6 bar / 88 psi despresurizable Hose 1.8 m / 70,8 inches Standard nozzles Adjustable conical nozzle and fan Lance 50 cm / 19,6 inches stainless steel Useful capacity 10l. - 2,6 U.S. Gals. Total capacity 13l. - 3,4 U.S. Gals. Litres/Min. 3 bar 0,7l/min - 0,18 gal/min Gross weight 4,9 kg - 10,8 lbs. Net weight 4,5 kg - 9,9 lbs. Cleaning & Maintenance Depressurize the sprayer and clean it with water after every use. Collect and dispose of the residual amount according to the legislation, prescriptions, and applicable regulations. In the event of obstruction of the nozzle, clean it with water and do not use metallic objects. If the filter of the handle is clogged, remove it and clean it with water. Store the sprayer under cover, avoiding freezing temperatures and extreme heat (between 5°C and 30°C).To prolong the life of the seals, regularly apply grease to the moving parts of the sprayer.