Check the listing for details. Max Water Whole House Water Filter Set 20" x 2.5" Cation, GAC, Sediment. Color: Multicolor, Condition: New. Listed at 78.95 USD. 1 set of replacement filters with following : 1 x 5 Micron Polypropylene Sediment Filter Three-layers structure cartridge, High contaminant holding capacity. 100% PP Polypropylene for compatibility with a wide range of process fluids. 5 Micron , Micro-Denier™ melt-blown filtration fiber, high removal ratings. Formed by thermal bond without use of any binders and adhesives. Maximum Operating Pressure: 125 PSI Operating Temperature Range: 40-100°F Dimensions: 20 inch x 2.5 inch Maximum Flow Capacity: 1 - 20* GPM 1 x GAC UDF Coconut Shell Carbon Filter GAC 20 inch Coconut shell Carbon Filter - Size 2.5 inch x 19 7/8 inch Remove chlorine, turbidity, bad taste & odors, sediment, dirt, and THMS from water. Thick Wall Coconut Base Carbon Filter Media // 100% coconut shell carbon Designed For maximum contact between the water and carbon. 5 Micron Nominal filter membrane included to prevent carbon fines to pass from the filter to your drinking water. Operational Temperature Range: 40°F to 125°F Low pressure drop across filter stage. 1 x Cation Resin Filter Cartridge Filter Media: Cation Resin Capacity : 2080 grains or 35,600 ppm Inner Diameter: 30mm Outer Diameter: 70mm Size 2.5 inch x 19 7/8 inch Fits most standard 20 inch size housings and most reverse osmosis systems. Reduces of TDS or hardness as required, or can be used as a pre-filter to prevent build-up of scale on sensitive equipment. Maximum Recommended Flow: 2.5 to 5 GPM ( depends on the incoming water pressure) Operation Temperature 40°F to 100°F (Maximum Temperature) Maximum pressure: 125 PSI (8.6 bar) Minimum pressure: 20 PSI (1.4 bar) Micron rating: 5 nominal End Caps: Polypropylene Inner/Outer Wraps: Polyolefin Netting: Polyethylene Total 3 filters, each individually wrapped.