Check the listing for details. MicroCare MCC-DGF14A Duraglide PTFE Dry Lubricant Spray, 14oz. Aerosol. Condition: New. Listed at 38.65 USD. The aerosol PTFE spray Duraglide is a medical-grade polytetrafluoroethylene microdispersion PTFE lubricant. Spray onto the surface to coat. Once it dries, which is almost instantly, it leaves a thin, uniform, dry, PTFE coating over any surface. This enables a low-cost, non-migrating, pyrogenically-inert coating.Brand: MicroCareLubricant Type: Dry LubricantPhysical Form: Liquid AerosolContainer Type: AerosolContainer Size: 14ozColor: White; Off WhitePrimary Color: White; Off WhiteChemical Composition: HFC-134a Tetrafluoroethane, Poly-Tfe, Omega-Hydro-Alpha-(Methylcyclohexyl), Propan-2-OlOdor: Slight AlcoholStandards Met: REACH and ELINCS Compliant; RoHS and WEEE Compliant; US EPA SNAP Approved; ISO 10993Shelf Life: IndefiniteApplications: Medical Applications:Mold releaseComponent assemblyResolves “stiction” problems common in low-speed, light-load applicationsFeatures:Ready-to-use-spray canCalibrated with a concentration of PTFE optimized for most lubrication needsDries in seconds and can appears on the part as a milky-white filmImparts a low coefficient of friction of 0.06ISO 10993 tested and certifiedFactory calibrated PTFE content for consistent resultsNon-­flammable handling in storage and useNo special equipment requirementsInimical to bio burden issuesCompatible with ETO and radiation sterilization processesOil free; non-migrating/non-stainingExcellent materials compatibility; plastic safeFast drying with minimal odorInstructions:Note: Wear safety glasses when using this product as a precautionTreated surfaces should be clean and dry before application of the lubricantTo ensure the lubricant dispenses uniformly, shake the canMake certain the “mixer ball” inside the can moves freely before each useHold the can 10-12 inches (25-30 cm) from the surfaceFor best results, apply as a thin mist - a single treatment is adequate for most applications