Check the listing for details. Milwaukee PH56 PRO Waterproof 2-in-1 pH/Temp Tester with Replaceable Probe. Condition: New. Listed at 100.00 USD. DESCRIPTIONThe Milwaukee pH56 PRO pH and Temperature Tester is our most accurate tester with the ability to easily replace the probe for years of use.The Milwaukee pH56 PRO pH and temperature tester offers:ACCURACYThe PH56 PRO tester is accurate to ±0.05 pH and ±0.5 C / ±1.0 F for temperature.With automatic calibration and 6 calibration points in memory, the tester can be quickly and easily be calibrated to a higher accuracy compared with manual calibration.LONG LIFEThe tester comes with a replaceable pH probe with a double junction probe design for longer life.FAST RESPONSEAn exposed temperature probe is located close to the pH probe for fast temperature compensationWATERPROOF CONSTRUCTIONNo more worries about dropping your tester while measuring. The PH56 is fully waterproof to IP65.LIGHT WEIGHTAt just 3.5 ounces, the PH56 PRO is easy to handle at up to half the weight of other testers.EASE-OF-USEA large dual level LCD screen makes reading results easy while a stability indicator and hold function that freezes the display takes the guess work out.DESIGN FEATURESFast easy to read results with large digital dual LCD readoutExtreme pH accuracy to ±0.05 pH with an extended pH range (-2.00 pH to 16.00 pH)Lightweight and portableEasy measurement: just place the probe in the sample, gently stir, wait for the stability indication to show a stable reading and then freeze the readingSimple push button, automatic one or two-point calibration with 6 saved calibration pointsGel-filled, double junction pH electrode for low maintenance and high performanceAuto shut off and low power demand for a 300 hour extended battery life (batteries included)Waterproof to IP65.CARE AND USEAll pH sensors have a limited life and response time gets longer with age. Properly maintaining your pH pen tester will give you fast, accurate results for longer. So, be sure to order the Milwaukee pH Maitenance Kit code PH-Main at checkout time! This will be needed to help clean and condition the pH electrode before use!Here are our top four tips.1. Always store with the cap full of buffer or storage solution MA9015 not water.2. Clean your Tester regularly by soaking in cleaning solution MA9016.3. Calibrate after cleaning and/or storage before testing to adjust for changes in the pH sensor.4. Gently stir the Tester in the sample for a faster result. SPECIFICATIONSpH Range: -2.00 to 16.00 pHTemp Range: -5.0 to 60.0°C / 23.0 to 140.0°FpH Resolution: 0.01 pHTemp Resolution: 0.1°C / 0.1°FpH Accuracy: ±0.05 pHTemp Accuracy: ±0.5°C / ±1°FpH: Typical EMC Deviation ±0.02 pHTemp: Typical EMC Deviation ±0.3°C / ±0.6°FCalibration automatic, 1 or 2 points with 2 sets of memorized buffers (pH 4.01, 7.01, 10.01 or 4.01, 6.86, 9.18)Temperature Compensation: Automatic from -5 to 60°CProbe: Replaceable double junction for extended life (Mi56P)Environment: -5 to 50°C / 32 to 122°F; max RH 100%Battery Type: 4 x 1.5V; IEC LR44, A76 (included)Battery Life: Approx. 300 hours of useAuto-off: After 8 minutes of non-useDimensions: 7.9 inches × 1.5 inches (diameter)Weight: 3.5 ounces