Check the listing for details. NetApp V3020 Network Appliance Storage Visualization Filer Head SAN NAS. Condition: Used. Listed at 6096.24 USD. NetApp V3020 Network Storage Visualization Filer Head110-00081 In good condition and full working order Included 1 x NetApp V3020 Network Appliance Storage Visualization Filer Head 110-000814 x Finisar FTLF8519P2BNL-(N1) 2.125Gbps Shortwave SPF Transceiver Modules1 x Pair of Rackmount Rails The V3000 series is the midrange NetApp heterogeneous storage virtualization solution for enterprise applications. V3000 systems deliver exceptional capabilities for both business and technical applications, across both SAN and NAS environments. FeaturesHigh Scalability V3000 systems scale to over 500TB of capacity, providing a single architecture and management interface for heterogeneous storage arrays. The V3070 scales to a maximum of 504 LUNs. Effective Consolidation The V3000 systems are ideally suited for storage consolidation supporting hundreds of applications because they are not only highly scalable but also very flexible. Data can be stored in either file or block format. Supported protocols include FC, NFS, CIFS, , and iSCSI for the greatest flexibility.The Data ONTAP® 7G operating system includes two standard features, FlexVol® and FlexShare™, which improve the effectiveness of consolidation. FlexVol creates volumes that can be readily expanded or contracted while reducing the need for spare capacity. FlexShare enables the consolidation of disparate workloads by ensuring that critical workloads get fast response. Unique Versatility V3000 systems can be used for SAN-based and/or NAS-based applications and for primary or secondary storage. High Availability A full range of high-availability and disaster recovery options are offered with the V3000 series. However, NetApp goes beyond the data center baseline for availability. Active-active controller configurations enable continuous access to data by automatically failing over to an additional V-Series controller without data loss. Similarly, the NetApp implementation of Snapshot™ copies has no performance impact and requires very little incremental storage, so Snapshot copies can be created frequently. The result is unparalleled application-level availability with recovery in minutes, not hours, after a failure or human error. Robust SANNetApp supports a complete Fibre Channel SAN infrastructure with a full range of certified hosts, adapters, switches, and directors. The V3000 systems are also capable of 4Gb FC SAN SpecificationsMaximum RAID Group SizesRAID-6 (RAID-DP)FC-28 (26 data disks plus 2 parity disks)SATA-16 (14 data disks plus 2 parity disks)RAID-4FC-14 (13 data disks plus 1 parity disk)SATA-7 (6 data disks plus 1 parity disk)RAID-6+RAID1 or RAID4+RAID1 (SyncMirror) SAN Protocol SupportFibre Channel Protocol (FCP) for SCSI (2Gb and 4Gb); fabric-attached and direct-attached; iSCSI File Service Protocol SupportNFS V2/V3/V4 over UDP or TCP, PCNFSD V1/V2 for (PC) NFS client authentication, Microsoft CIFS Other Protocol Support"left">Reliability Redundant hot-swappable controllers, cooling fans, power supplies, optics, and RJ-45 ports ManagementFull-duplex 10/100/1000Base-T Ethernet onboard console, diagnostic LED/LCD, Remote LAN Management (RLM) Card, SNMP, telnet, SSH, , Web (SSL), host scripting, e-mail alerts SecurityVirus ProtectionAuthentication: Kerberos (MIT/Active Directory)Authorization: LDAP, NISAuditing: File access loggingEncryption: IPSec, SSL, SSH, SMB signingRole Based Access Control (RBAC) Scalability Configuration: Single ControllerMax. Raw Capacity: 84TBMax. Number of Disk Drives: 168Max. Drives per Back-End (Disk) FC Loop: 84ECC Memory: 2GBNonvolatile Memory: 512MB I/OConfiguration: Single ControllerOnboard (fixed) Fibre Channel Ports (target or initiator): 4 ports of 2GbOnboard (fixed) GbE Ports: 4Modular I/O Slots: 3 I/O Card Support Configuration: Single ControllerDual FC Disk Adapters (max.): 3Dual 4Gb FC Target Adapters (max.): 2Quad 4Gb FC Disk/Tape Adapters (max.): 3Dual FC -Tape Adapters (max.): 3Dual-port SCSI HBA: 3Quad GbE TOE (copper) cards: 2Single 10GbE TOE (fiber) cards: 2Dual GbE (copper or fiber) cards: 3Dual iSCSI (copper or fiber) host adapter: 3Boot Log sysconfig -vMon Jul 29 12:49:18 GMT [shelf.config.unknown:info]: System storage configuration is unknown NetApp Release 7.3.1.1: Mon Apr 20 22:58:46 PDT 2009 System ID: 0101206184 () System Serial Number: 20006118 () System Rev: c0 System Storage Configuration: Unknown slot 0: System Board 2797 MHz (NetApp System Board X A2) Model Name: V3020 Part Number: 110-00081 Revision: A2 Serial Number: 0446957 Firmware release: CFE 3.1.0 Agent FW version 15 LCD FW version 1.7 Processors: 1 Processor type: Intel Xeon Memory Size: 2048 MB slot 0: Dual 10/100/1000 Ethernet Controller VI e0a MAC Address: 00:a0:98:0c:27:0a (auto-unknown-cfg_down) e0b MAC Address: 00:a0:98:0c:27:0b (auto-unknown-cfg_down) e0c MAC Address: 00:a0:98:0c:27:08 (auto-unknown-cfg_down) e0d MAC Address: 00:a0:98:0c:27:09 (auto-unknown-cfg_down) Device Type: Rev 3 slot 0: FC Host Adapter 0a (Dual-channel, QLogic 2322 rev. 3, 64-bit, L-port, ) Firmware rev: 3.3.27 Host Loop Id: 0 FC Node Name: 5:00a:098200:02619b Cacheline size: 16 FC Packet size: 2048 SRAM parity: Yes External GBIC: No Link Data Rate: 1 Gbit slot 0: Fibre Channel Target Host Adapter 0b (Dual-channel, QLogic 2322(2362) rev. 3, 64-bit, ) Firmware rev: 0.0.0 Host Port Addr: 000000 Cacheline size: 8 SRAM parity: Yes FC Nodename: 00:00:00:00:00:00:00:00 (0000000000000000) FC Portname: 00:00:00:00:00:00:00:00 (0000000000000000) Connection: No link slot 0: FC Host Adapter 0c (Dual-channel, QLogic 2322 rev. 3, 64-bit, L-port, ) Firmware rev: 3.3.27 Host Loop Id: 0 FC Node Name: 5:00a:098000:02619b Cacheline size: 16 FC Packet size: 2048 SRAM parity: Yes External GBIC: No Link Data Rate: 1 Gbit slot 0: Fibre Channel Target Host Adapter 0d (Dual-channel, QLogic 2322(2362) rev. 3, 64-bit, ) Firmware rev: 0.0.0 Host Port Addr: 000000 Cacheline size: 8 SRAM parity: Yes FC Nodename: 00:00:00:00:00:00:00:00 (0000000000000000) FC Portname: 00:00:00:00:00:00:00:00 (0000000000000000) Connection: No link slot 0: SCSI Host Adapter 0e (Adaptec AIC7892, ) HW Version 0.0 Ultra160 SCSI, Low Voltage Differential slot 0: NetApp ATA/IDE Adapter 0f (0x000001f0) 0f.0 STEC NACF1GM1U-B11 01/17/07 977MB 512B/sect (STI1M93308002105848) slot 1: NVRAM (NetApp NVRAM V) Revision: B1 Serial Number: 542888 Memory Size: 512 MB Battery Status: OK (3690 mV) Charger Status: ON Running Firmware: 7 (3.5.0) Cluster Interconnect Port 1: disconnected Cluster Interconnect Port 2: disconnected VAT @ 20% INCLUDED IN PRICE - VAT INVOICE PROVIDED £4000 excluding VAT VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK LA 79579